We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
The SKF C 3052 K/HA3C4 is a 260mm tapered-bore CARB toroidal roller bearing with C4 clearance and a sheet metal cage. The 1:12 tapered bore enables adapter sleeve mounting. Designed to accommodate axial expansion and misalignment in heavy industrial applications such as paper mills and mining equipment.
MODEL C 3052 K/HA3C4
$14,997.57 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bore Type
Tapered
Cage
Sheet metal
Inner Diameter (mm)
260.000
Lubricant (in Bearing)
None
Material/Treatment
Bearing steel
O.D. (in)
15 3/4
Outer Diameter (mm)
400.000
Radial Internal Clearance
C4
Sealing
None
Width (mm)
104.000
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | PEER Bearing |
| Model | HC208-40MM-AP |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF