We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
The SKF RNU 203 ECP is a 17mm bore NU-type cylindrical roller bearing with enhanced capacity and a polyamide cage. This separable bearing accommodates axial expansion and is designed for high radial loads at moderate to high speeds. Suitable for gearboxes, pumps, and electric motors.
MODEL RNU 203 ECP
$61.70 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bearing Part
Bearing without inner ring
Bore Type
N/A
Cage
Non-metallic
Dimension Type
Metric
Inner Diameter (mm)
22.100
Locating Feature Bearing
None
Loose Side Ring
None
Lubricant (in Bearing)
N/A
Material/Treatment
Bearing steel
Number of Ribs - Inner Ring
N/A
Number of Ribs - Outer Ring
Two
Outer Diameter (mm)
40.000
Radial Internal Clearance
N/A
Relubrication Feature
Without
Sealing
None
Width (mm)
12.000
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | MCR Safety |
| Model | H1NXL |
| Brand | FAG Bearing |
| Model | 22214E1AK.M |
| Brand | SKF Bearing |
| Model | NNF 5016 ADA-2LSV |
| Brand | Pyramex |
| Model | RTS2110NPXL |
| Brand | SKF Bearing |
| Model | RN 2010 ECM/VB013 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF