We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
The SKF 627 2ZJEM is a 7mm bore deep groove ball bearing, double shielded with metal shields on both sides. It features C3 clearance and a machined brass cage for durability. Suitable for high-speed applications requiring low friction and reliable performance.
MODEL 627 2ZJEM
$14.44 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Basic Dynamic Load Rating
3.45 kN
Basic Static Load Rating
1.37 kN
Bearing Material
Bearing steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
7 mm
Bore Type
Cylindrical
Cage
Sheet metal
Clearance
C3
Coating
Without
Dimension Type
Metric
Filling Slots
Without
Inner Diameter (mm)
7.000
Limiting Speed
36000 r/min
Locating Feature Bearing
None
Lubricant
Grease
Lubricant (in Bearing)
Grease
Matched Arrangement
No
Material/Treatment
Bearing steel
Number of Rows
1
O.D. (in)
0.866
Outer Diameter (mm)
22.000
Pack Height
57 mm
Pack Length
55 mm
Pack Width
19 mm
Radial Internal Clearance
C3
Reference Speed
70000 r/min
Relubrication Feature
Without
Seal Type
N/A
Sealing
Shield on both sides
Sealing Type
Non-contact
SKF Performance Class
SKF Explorer
Tolerance Class
Class P6 (P6)
Width (in)
0.276
Width (mm)
7.000
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | SMC |
| Model | MKB32-10LNZ-M9NSDPC |
| Brand | Taylor Pneumatic |
| Model | T-8894 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-663169 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF