We never sell your data to third parties
SKF 728619 E is a maintenance product bearing. This component is designed for use in industrial maintenance and repair applications. The 728619 E is a standard SKF bearing suitable for various machinery requiring reliable performance.
MODEL 728619 E
$5,438.12 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
1st Stage Volume Per Stroke
20 cm³, below 2.5 MPa
2nd Stage Volume Per Stroke
1.0 cm³, above 2.5 MPa
Case Dimensions (l X H X W)
753 x 190 x 330 mm
Colour
Grey;Black
Connection Nipple
G 1/4 (male)
Dimensions (W X L X H)
130 x 620 x 170 mm
Filled with Oil
Yes, with SKF Mounting Fluid LHMF 300
Handle Force at Maximum Oil Pressure
370 N
Hose Length
3000 mm
Housing
Aluminium pump body
Maximum Pressure
150 MPa
Oil Container Capacity
2400 ml
Operating Temperature Range
10-35 °C
Pack Height
190 mm
Pack Length
753 mm
Pack Width
345 mm
Pressure Gauge
Yes, analogue
Product Weight
11.1 kg
Recommended Storage Temperature
10-40 °C
Relative Humidity
0 to 75%, non-condensing
Suitable for Drive up Method
No
Suitable for Hydraulic Nut HMV - Largest
54
Suitable for Hydraulic Nut HMV - Smallest
10
Suitable for Hydraulic Nut HMV Range
9-200
Type
Hand operated pump
Type of Pump
Two stage
The SKF 728619 E is a two-stage pump suitable for use with SKF Supergrip Bolts and to mount bearings or components where a maximum pressure of 150 MPa(21, 750 psi) is required. The 728619 E can be used to install SKF Supergrip Bolts and for Oil injection applications where the maximum pressureis 150 MPa (21, 750 psi). The 728169 E can be used with all sizes of SKF Hydraulic Nuts.
- Oil container capacity 2550 cm³ (155 in³)
- Two stage pressure pumping
- Fitted with a pressure gauge
- Supplied with an extra litre of fluid
- Packed in a sturdy protective case
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF