We never sell your data to third parties
SKF TMHP 10E is a hydraulic pump for bearing mounting and dismounting. It delivers high-pressure oil for safe installation of bearings with interference fits. Suitable for maintenance workshops and industrial machinery.
MODEL TMHP 10E
$1,842.72 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Arms
Set 1 (TMHP 10E-10) with arm length 190 mm;Set 2 (TMHP 10E-11) with arm length 240 mm;Set 3 (TMHP 10E-12) with arm length 285 mm
Case Dimensions (l X H X W)
580 x 410 x 70 mm
Claw Height
8 mm
Claw Length
15 mm
Claw Width
25 mm
Coating
Black phosphated, Hydraulic spindle with trivalent chromium parts
Colour
Black;Silver
Dismounting Force Generation
Hydraulic spindle (TMHS 100)
Material
Alloy engineering steels, hardened and tempered
Pack Height
80 mm
Pack Length
643 mm
Pack Width
420 mm
Piston Stroke Hydraulic Spindle
80 mm
Puller Adaptor Thread
UN 1.5 x 16 tpi
Pulling Force (max)
100 kN
Reach, using arms (max)
Set 1: 115 mm;Set 2: 160 mm;Set 3: 200 mm
Recommended Storage Temperature
5-40 °C
Relative Humidity
max 75%
Spindle Nose Piece
yes, ⌀ 30mm
Suitable for Bearing Dismounting from A Sleeve (adapter or Withdrawal Sleeve)
Yes
Suitable for Bearing Dismounting from A Tapered Seating (conical Shaft)
Yes
Suitable for Bearing Type(s)
All
Suitable for Workpiece Dismounting from A Blind Arrangement (housing with Shaft)
No
Suitable for Workpiece Dismounting from A Cylindrical Seating (straight Shaft)
Yes
Suitable for Workpiece Dismounting from A Housing
No
Total Number of Arms in Kit
3 sets of 3
Total Spindle Length
655 mm (incl. 3 available extension pieces)
Workpiece outer diameter range, using arms
Set 1: 75 to 170 mm;Set 2: 80 to 250 mm;Set 3: 110 to 280 mm;
Hydraulic jaw puller kit
The TMHP 10E is a complete puller kit for bearing dismounting. The kit includes three different arm sets that can be used in a 2-arm or 3-arm configuration. The puller uses a hydraulic spindle for easy dismounting with dismounting forces up to 100 kN (11.2 US ton). With a stroke of 80 mm (3.1 in.), the spindle facilitates dismounting in one operation. Safety is supported through a self-locking arms that reduce puller slippage under load, a spring-loaded centre point to enable easy spindle centring and a safety valve to prevent puller overload.
- Versatile kit with three different arm lengths usable in 2-arm or 3-arm configuration
- Effortless dismounting with hydraulic spindle
- Self-locking arms minimise risks of slippage under load
- Spring-loaded centre point allows easy puller centring
- Supplied with three hydraulic spindle extension pieces to allow quick adaptation to required pulling length
- Hydraulic spindle is equipped with safety valve to prevent puller overload
SKU: 320006
Bearing purchase
Good price and fast delivery!! Also a pleasure doing business with MROSupply.com!!
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | MROSupply Fasteners |
| Model | FSTPCK-830586 |
| Brand | Pyramex |
| Model | SB1010SJ |
| Brand | System Plast |
| Model | VG-684BR-1.5-AB-04 |
| Brand | FAG Bearing |
| Model | 6324M.C3 |
SKU: 320006
Bearing purchase
Good price and fast delivery!! Also a pleasure doing business with MROSupply.com!!
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF