We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF NA 2204.2RSX is a 7/9 in bore needle roller bearing with seals on both sides. It features a steel cage and is made from bearing steel. This bearing is designed for applications requiring high radial load capacity in a compact cross-section.
MODEL NA 2204.2RSX
Returnable:No
Application
Support roller
Axial Locating of Outer Ring
Yes
Bearing Part
Complete track roller
Cage
With
Dimension Type
Metric
Inner Diameter (mm)
20.000
Lubricant (in Bearing)
Grease
Material/Treatment
Bearing steel
Number of Flanges on Outer Ring
Two
O.D. (in)
1 6/7
Outer Diameter (mm)
47.000
Relubrication Feature
With
Rolling Elements
Needle rollers
Sealing
Contact seals
Type
Separable
Width (mm)
18.000
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Superlok |
| Model | SUNV1-S4-GR |
| Brand | Bando |
| Model | P72H300 SF |
| Brand | Bunting Bearings |
| Model | B932C010028-IN |
| Brand | Contrinex Sensors |
| Model | DW-AD-634-M18 |
| Brand | SMC |
| Model | ISE20B-R-C6L-WA2-X500 |
| Brand | Dixon Sanitary Fittings |
| Model | T2KMP-200PM |
| Brand | Nachi Bearing |
| Model | 22308EXQW33KC3 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF