We never sell your data to third parties
SKF NKX 25 Z is a 25mm bore combined needle roller and thrust ball bearing with a 52mm OD and 20mm width. The Z suffix indicates a shield on one side. This compact unit handles radial loads via the needle roller section and axial loads via the thrust ball section, suitable for machine tool spindles and industrial drives.
MODEL NKX 25 Z
$153.98 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Inner Diameter (mm)
25.000
O.D. (in)
1 5/7
Outer Diameter (mm)
43.200
Width (mm)
30.000
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | WorldWide Electric |
| Model | HdRF154-15/1-R-56C |
| Brand | Gates Rubber |
| Model | 4 X 85 RE |
| Brand | Linn Gear |
| Model | OC131-2X.375 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF