We never sell your data to third parties
SKF NN 3014 TN/SP NN-type double-row cylindrical roller bearing, 70mm bore, 2 3/4 in ID, 4 1/3 in OD. Non-metallic polyamide cage. Separable design with no flanges on the outer ring accommodates axial expansion. Bearing steel construction. Suitable for high radial load capacity and high-speed applications such as machine tool spindles and precision gearboxes.
MODEL NN 3014 TN/SP
$862.58 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bearing Part
Complete bearing
Bore Type
Cylindrical
Cage
Non-metalic
Dimension Type
Metric
Inner Diameter (mm)
70.000
Locating Feature Bearing
None
Loose Side Ring
None
Lubricant (in Bearing)
None
Material/Treatment
Bearing steel
Number of Ribs - Inner Ring
Two
Number of Ribs - Outer Ring
None
O.D. (in)
4 1/3
Outer Diameter (mm)
110.000
Radial Internal Clearance
Group (C1)
Relubrication Feature
With
Sealing
None
Width (mm)
30.000
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Consolidated Bearings |
| Model | NUP-2216E M C/4 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF