We never sell your data to third parties
SKF 2305 E-2RS1TN9 self-aligning ball bearing, 25mm bore, 1 in ID, 2 4/9 in OD. Double contact seals (NBR) and glass-fiber-reinforced polyamide cage. Enhanced capacity design accommodates moderate misalignment and shaft deflection. Suitable for applications where alignment errors are unavoidable.
MODEL 2305 E-2RS1TN9
$157.26 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Basic Dynamic Load Rating
19 kN
Basic Static Load Rating
5.4 kN
Bearing Material
Bearing steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
25 mm
Bore Type
Cylindrical
Cage
Non-metallic
Coating
Without
Dimension Type
Metric
Inner Diameter (mm)
25.000
Inner Ring Retaining Feature
None
Limiting Speed
7500 r/min
Locating Feature Bearing
None
Lubricant
Grease
Lubricant (in Bearing)
Grease
Material/Treatment
Bearing steel
Number of Rows
2
O.D. (in)
2 4/9
Outer Diameter (mm)
62.000
Pack Height
77 mm
Pack Length
74 mm
Pack Width
26 mm
Radial Internal Clearance
C0
Reference Speed
22000 r/min
Relubrication Feature
Without
Seal Type
Contact
Sealing
Seal on both sides
Sealing Type
Contact
Tolerance Class
Normal
Width
24 mm
Width (mm)
24.000
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#5031063
Brand
NSK Bearings
Model
2305-2RSTN
#2173170
Brand
FAG Bearing
Model
2305.2RS.TV
#829344
Brand
NTN Bearing
Model
2305EEG15
| Brand | Nachi Bearing |
| Model | 6026C3 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-451809 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF