We never sell your data to third parties
SKF 6308-2Z/VA228 deep groove ball bearing, 40mm bore, 80mm OD, 23mm width. Double shielded with metal shields on both sides. Full complement design (no cage) with graphite cage for maximum load capacity. Heat stabilized for high-temperature applications up to 200°C. Suitable for traction motors and railway equipment.
MODEL 6308-2Z/VA228
$258.70 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Basic Static Load Rating
24 kN
Bearing Material
High temperature steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
40 mm
Bore Type
Cylindrical
Cage
Non-metallic
Clearance
C0 Medium
Coating
Coated
Dimension Type
Metric
Filling Slots
Without
Inner Diameter (mm)
40.000
Limiting Speed
130 r/min
Locating Feature Bearing
None
Lubricant
Solid lubricant
Lubricant (in Bearing)
Other
Matched Arrangement
No
Material/Treatment
Coated
Maximum Operating Temperature
350 °C
Number of Rows
1
O.D. (in)
3.543
Outer Diameter (mm)
90.000
Pack Height
96 mm
Pack Length
94 mm
Pack Width
27 mm
Radial Internal Clearance
N/A
Relubrication Feature
Without
Seal Type
Non-contact
Sealing
Shield on both sides
Sealing Type
Non-contact
Tolerance Class
Normal
Width
23 mm
Width (mm)
23.000
SKU: 320006
Bearing purchase
Good price and fast delivery!! Also a pleasure doing business with MROSupply.com!!
Read moreSKU: 2069041
Purchase of bearing
exactly what we needed and it showed up in only 1 day thank you so much.
Read moreSKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Consolidated Bearings |
| Model | FY-15 |
| Brand | Century |
| Model | FB1156TE |
| Brand | Bonfiglioli |
| Model | ME76G012005Z |
SKU: 320006
Bearing purchase
Good price and fast delivery!! Also a pleasure doing business with MROSupply.com!!
Read moreSKU: 2069041
Purchase of bearing
exactly what we needed and it showed up in only 1 day thank you so much.
Read moreSKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF