We never sell your data to third parties
SKF 51116 is an 80mm bore thrust ball bearing with a sheet metal cage. Designed for axial loads in one direction, it accommodates moderate speeds and is suitable for machine tool spindles, gearboxes, and general industrial applications.
MODEL 51116
$228.18 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Axial Load Capability
Single-direction
Axial Loading
Single-direction
Basic Dynamic Load Rating
44.9 kN
Basic Static Load Rating
140 kN
Bearing Material
Bearing steel
Bore Diameter
80 mm
Cage
Sheet metal
Clearance
Standard
Coating
Without
Dimension Type
Metric
Height
19 mm
Housing Washer Type
Flat back face
Inner Diameter (mm)
80.000
Limiting Speed
4300 r/min
Material/Treatment
Bearing steel
Number of Rows
1
O.D. (in)
4.134
Outer Diameter (mm)
105.000
Pack Height
116 mm
Pack Length
114 mm
Pack Width
26 mm
Reference Speed
3000 r/min
Tolerance Class
Normal
Width (mm)
19.000
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#2302270
Brand
Rollway
Model
51116
#5032809
Brand
NSK Bearings
Model
51116
#283315
Brand
NTN Bearing
Model
51116
#2171495
Brand
FAG Bearing
Model
51116
| Brand | Remco Products |
| Model | 6962MD5 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF