We never sell your data to third parties
SKF 52222 thrust ball bearing, 110mm bore, 3.74 in ID, 6.299 in OD. Sheet metal cage, bearing steel construction, standard clearance. Designed for axial loads in one direction at moderate speeds for machine tool spindles, gearboxes, and general industrial applications.
MODEL 52222
$1,407.22 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Axial Loading
Double-direction
Cage
Sheet metal
Clearance
Standard
Dimension Type
Metric
Housing Washer Type
Flat back face
Inner Diameter (mm)
95.000
Material/Treatment
Bearing steel
O.D. (in)
6.299
Outer Diameter (mm)
160.000
Width (mm)
67.000
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Bell & Gossett |
| Model | 118368 |
| Brand | NSK Bearings |
| Model | 6322ZZC3 |
| Brand | NTN Bearing |
| Model | 6311LLBC3/EM |
| Brand | Gates Rubber |
| Model | 166-2MGT-04 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-402336 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-536202 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF