We never sell your data to third parties
SKF 6040 M deep groove ball bearing, 200mm bore (7.874 in ID, 12.205 in OD), open configuration with normal clearance. Machined brass cage and standard bearing steel construction. Suitable for electric motors, pumps, fans, and general industrial applications.
MODEL 6040 M
$2,384.43 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Basic Dynamic Load Rating
216 kN
Basic Static Load Rating
245 kN
Bearing Material
Bearing steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
200 mm
Bore Type
Cylindrical
Cage
Machined (solid)
Clearance
Normal
Coating
Without
Dimension Type
Metric
Filling Slots
Without
Inner Diameter (mm)
200.000
Limiting Speed
3600 r/min
Locating Feature Bearing
None
Lubricant
None
Lubricant (in Bearing)
None
Matched Arrangement
No
Material/Treatment
Bearing steel
Number of Rows
1
O.D. (in)
12.205
Outer Diameter (mm)
310.000
Pack Height
339 mm
Pack Length
332 mm
Pack Width
67 mm
Radial Internal Clearance
C0
Reference Speed
4300 r/min
Relubrication Feature
Without
Seal Type
N/A
Sealing
None
Tolerance Class
Normal
Width
51 mm
Width (mm)
51.000
SKU: 315294
Bearing
Old hard to find bearing for a 85 year old tractor. Fit perfect and price was great.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#5033505
Brand
NSK Bearings
Model
6040M
#2301487
Brand
Rollway
Model
6040 M
#2175156
Brand
FAG Bearing
Model
6040M
| Brand | NSK Bearings |
| Model | 22213EAE4C3 |
| Brand | Fasco |
| Model | 35-479 |
| Brand | NTN Bearing |
| Model | UEL205D1 |
SKU: 315294
Bearing
Old hard to find bearing for a 85 year old tractor. Fit perfect and price was great.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF