We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
The SKF GEZ 600 ES-2RS is a 600mm bore spherical plain bearing with inch-series steel-on-steel sliding contact. Designed for heavy oscillating and tilting loads in industrial machinery, construction equipment, and hydraulic cylinders. The ES-2RS suffix indicates maintenance-free operation with PTFE fabric liner and integral seals.
MODEL GEZ 600 ES-2RS
$2,273.85 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Dimension Type
N/A
Inner Diameter (mm)
152.400
Lubricant (in Bearing)
None
Material/Treatment
N/A
O.D. (in)
8 3/4
Outer Diameter (mm)
222.250
Radial Internal Clearance
C0
Relubrication Feature
With
Sealing
With seals
Sliding Material - Contacting Surfaces
Steel / Steel
Type
Radial
Width (mm)
120.650
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | MROSupply Fasteners |
| Model | FSTPCK-846418 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-456105 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-531164 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-878210 |
| Brand | SMC |
| Model | VNB104BS-N8A |
| Brand | Consolidated Bearings |
| Model | LFR-50/5-6-ZZ |
| Brand | SMC |
| Model | AR20-F01-B |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF