We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Link-Belt MU1214UHV 10471754 Series 1200 unmounted cylindrical roller bearing with 70 mm bore. This light-series bearing features a double-rib inner ring and single-rib outer ring with one retaining ring. Direct shaft mount design for industrial applications requiring high radial load capacity.
MODEL 10471754
Contact supplier for technical support on: 800-626-2120
$221.66 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Basic bearing sumber
1214
Bearing width (mm)
24 mm
Bore size (mm)
70 mm
C dynamic load rating
Call eng lb
Co static load rating
Call eng lb
Housing Shoulder Diameter (Plain Outer Ring) [Max] (mm)
115.6 mm
Housing Shoulder Diameter (Ribbed Outer Ring) [Max] (mm)
111.5 mm
Inner Ring and Roller Assembly Over Roller Diameter (mm)
111.47 mm
Inner ring bore radius (mm)
2.54 mm
Inner Ring Raceway Outside Diameter (mm)
84.77 mm
Inner Ring Rib Outside Diameter (mm)
89.61 mm
Inner ring type
Double Rib (U)
Maximum Speed (RPM)
CALL ENG rpm
Mounted clearance
See description
Outer Ring and Roller Assembly Under Roller Diameter (mm)
84.84 mm
Outer Ring Raceway Inside Diameter (mm)
111.54 mm
Outer Ring Rib Inside Diameter (mm)
107.01 mm
Outer ring type
Single rib outer ring one retaining ring in I.D. (U)
Outside diameter (mm)
125 mm
Retainer type
See description
Ring width series
Narrow (1)
Rolling element
Cylindrical
Series
Unmounted Bearings
Shaft locking
Direct shaft mount
Shaft Shoulder Diameter (Plain Inner Ring) [Min] (mm)
81.8 mm
Shaft Shoulder Diameter (Ribbed Inner Ring) [Min] (mm)
84.6 mm
Vibration frequency fundamental train
Call Eng cps
Vibration frequency inner ring defect
Call Eng cps
Vibration frequency outer ring defect
Call Eng cps
Vibration frequency roller spin
Call Eng cps
Contact Application Engineering
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#486120
Brand
Link-Belt
Model
10472171