We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Link-Belt KPSS2M40DC (Rexnord 10442650) KPSS200 Klamploc 2-bolt pillow block ball bearing with 40 mm bore and concentric collar lock. Cast iron housing with single lip contact seal and stainless steel retainer. Fixed (non-expansion) design for intermediate-duty applications. C3 internal clearance. 52100 bearing steel.
MODEL 10442650
Contact supplier for technical support on: 800-626-2120
$176.03 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Ability to Relubricate
Yes
Auxiliary cap kit
K2236 (Closed); K2M406D (Open)
Available end cap
Yes
Base Length (in)
7.28
Base to centerline height (in)
2
Base Width (in)
1.52
Bearing Insert Material
400 Series Stainless Steel
Bearing Type
Intermediate Duty
Bolt hole spacing (width) (in)
5.35
Bolt Size (in)
1/2
Bolt Size (mm)
M12
Bore Diameter (mm)
40
Bore Shape
Straight
Cage Material
Stainless Steel
Cage Type
Ball Riding Retainer
Clearance
C3 STANDARD
Distance from Bearing Centerline to Cap Face (in)
1.64
Distance from Bearing Centerline to Inside of Cap Face (in)
1.56
Distance from Bearing Centerline to Outer Most Bearing Face (in)
1.205
Dynamic Load Rating (lb)
7330
Fixed vs. Expansion
Fixed
Foot Height (in)
0.79
Foot Height (mm)
20
Grease Fitting Thread Size
RP 1/8 PAR
Height
2.44
Housing Color
Black
Housing construction
One Piece
Housing material
Polyamide
Housing style
Pillow Block
Housing type
Pillow Block, Two Bolt
Inner Ring Outside Diameter (in)
2.084
Insert
SSG2M40L
Length
7.94
Length Through Bore (in)
1.662
Lube Fitting Type
STD FITTING PLUS PLASTIC PLUG
Lubricant
MOBIL FM222 FOOD GRADE H1
Maximum Speed (RPM)
4500
Maximum Temperature (C)
90
Maximum Temperature (F)
194
Misalignment Capability
±2.0° Misalignment - Static Only
Misalignment Type
Static Only
Outer Ring Land Profile
Standard
Overall Height (in)
4.41
Overall Length (in)
7.28
Overall width (in)
1.66
Rolling element
Ball Bearing
Seal kit
K2M40E (back auxiliary seal)
Seal type
Single Lip Contact Seal
Setscrew torque (in-lbs)
165-185
Shaft locking
Set Screw
Size code
208
Slot Length (in)
0.94
Slot Length (mm)
24
Static Load Rating (lb)
4460
Vibration frequency fundamental train
0.0065
Vibration frequency inner ring defect
0.0912
Vibration frequency outer ring defect
0.0588
Vibration frequency roller spin
0.0367
Width
4.69
40 mm Mounted Ball Bearing, Intermediate Duty, Polyamide 2-Bolt Pillow Block, Setscrew Locking, Single Lip Contact Seal, Closed end cap and rear auxilary dual lip seal, Stainless Steel Insert
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Slew ring bearings, also referred to as slewing bearings, slewing rings, or turntable bearings, are forms of bearings designed to allow rotational motion between several components.
Read More