We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Link-Belt TDS3U231N18 (mfg part 10443199) is a tap-based mounted ball bearing take-up assembly with a 1-15/16" bore, set screw locking, and a welded steel frame. It features a cast iron housing, single lip contact seal, and C3 clearance. This fixed take-up unit has an 18" travel length and is designed for conveyor applications.
MODEL 10443199
Contact supplier for technical support on: 800-626-2120
$2,712.24 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Ability to Relubricate
Yes
Available end cap
No
Available seal type
E3 Triple lip seal;N lip seal;H labyrinth seal
Base to centerline height (in)
3 15/16 in
Base Width (in)
3
Bearing housing
TUASBLY TA BASE MT 18IN
Bearing housing material
Cast iron
Bearing Insert Material
52100 Bearing Steel
Bearing Type
Standard duty ball brg
Bolt hole spacing (width) (in)
32.5
Bore diameter (in)
1.9375
Bore Shape
Straight
C dynamic load rating
7920 lb
Cage Material
Molded fiber glass reinforced nylon
Cage Type
Ball Riding Retainer
Co static load rating
5220 lb
Distance from Bearing Centerline to Cap Face (in)
1 15/16 in
Distance from Bearing Centerline to Housing Face (in)
55/64 in
Distance from Bearing Centerline to Outer Most Bearing Face (in)
1 17/64 in
Fixed expansion
Fixed
Foot Height (in)
1.75
Frame
ZNT618
Frame bolt hole spacing (in)
32 1/2 in
Frame height (in)
8 1/4 in
Frame length (in)
34 1/2 in
Frame Material
Welded steel
Frame type
Conveyor Take-Up Hinged Top
Frame Width (in)
4.125 in
Grease fitting size
1/8 NPT
Housing coating
Powder coated
Housing Color
Black
Housing construction
One Piece
Housing style
Take-Up Assembly
Housing type
Take-Up Assembly
Housing width (in)
4 1/8 in
Insert
UG231NL
Lubricant
Lithium Complex NLGI 2 Grease
Lubrication type
EXXON RONEX MP STD
Max Speed
4800 rpm
Max temperature (°F (°C))
225 (107) F (C)
Maximum Temperature (C)
107
Misalignment Capability
±2.0° Misalignment - Static Only
Misalignment Type
Static Only
Mounted clearance
C3 standard
Mounting bolt size (in)
5/8 in
Mounting pad height (in)
1 3/4 in
Mounting pad width (in)
3 in
Outer Ring Land Profile
Standard
Overall Height (in)
8.25
Overall Length (in)
34.5
Overall width (in)
4.13
Primary seal
BUNA single lip contact seal
Retainer type
Nylon
Rolling element
Ball Bearing
Service instructions
BR3-007 LB 200 ball-300 ball
Setscrew torque (in-lbs)
290-325 in/lbs
Shaft diameter (in)
1 15/16 in
Shaft locking
Setscrew locking
Size code
210
Take-up block
TD3U231N
Take-up block and bearing
TD3U231N
Take-up frame assembly type
Conveyor Take-Up Hinged Top
Travel length (in)
18 in
Type of seal
Single lip contact seal
Vibration frequency fundamental train
0.0068 cps
Vibration frequency inner ring defect
0.0985 cps
Vibration frequency outer ring defect
0.0682 cps
Vibration frequency roller spin
0.0445 cps
1 15/16" Mounted Ball Bearing, Standard Duty, Protected Screw Take-up Assembly, Setscrew Locking, Single Lip Contact Seal, 18" travel
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Cutler Hammer |
| Model | HMCP250F5C |