We never sell your data to third parties
Link-Belt 2K1435Z (Rexnord 10416174) 2K1400Z series pillow block bronze sleeve bearing with 2-3/16" shaft diameter. Cast steel housing with powder coating, split gib-joint design, and bronze sleeve. Includes 285BY33 bushing and 131Y3663 shims. Not greased from factory; 3/8 NPT grease fitting. Maximum temperature 300°F (150°C).
MODEL 10416174
Contact supplier for technical support on: 800-626-2120
$5,912.20 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Base to centerline height (in)
1 7/8 in
Bearing Type
BRONZE SLEEVE BRG
Bolt Hole Spacing Width (in)
1 3/4 in
Bore length (in)
4 1/2 in
Bore size (in)
2 3/16 in
Bushing
285BY33
Distance between bolt holes (in)
6 3/4 in
Expansion Type
Non-Expansion Bearing (Fixed)
Grease fitting size
3/8 NPT
Height
5.50
Housing coating
Powder coated
Housing material
Cast steel
Housing style
Pillow block
Housing type
Pillow Block, Four Bolt, Gibbed Joint
Insert
285BY33
Length
9.56
Lubrication type
Not greased from factory
Maximum Temperature (C)
150 C
Maximum Temperature (F)
300 F
Mounting bolt hole slot length (in)
3/4 in
Mounting bolt size (in)
1/2 in
Mounting pad height (in)
1 in
Mounting pad length (in)
8 1/2 in
Mounting pad width (in)
3 1/2 in
Pipe Tap Size (in)
3/8 in
Required Distance for Cap Removal (in)
4 15/16 in
Shims
131Y3663 QTY 4
Sleeve material
Bronze
Unit of dimension
in
Volume
0.911
Volume unit
GLL
Width
4.00
Rigid sleeve bearing units provide compact and reliable usage in applications where continuous operation and uninterrupted service are required. Because the bearing material wears gradually, sudden breakdowns and costly maintenance are minimized. Sleeve bearings can also operate extremely quietly. The standard bearing materials of babbitt, bronze and cast iron will handle a wide variety of applications such as on log decks, sewage treatment equipment, furnaces and ovens, quiet operating fans and blowers, power plant dampers and stokers, oscillating shaft applications and other general conveying and power transmission machinery.
Babbitt bearings are used for moderate speeds and loads and ambient temperatures up to 130°F (54°C). Babbitt has the ability to give excellent service with a minimum of maintenance.
Bronze bearings are recommended for heavier loads, impact, and temperatures beyond the limits of babbitt bearings. They can be operated at ambient temperatures up to 300°F (149°C) providing satisfactory lubrication is available. Bronze has excellent all-around bearing characteristics; it has a relatively low coefficient of friction and a remarkable resistance to shock and wear.
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | MROSupply Fasteners |
| Model | FSTPCK-P92120 |
| Brand | Gates Rubber |
| Model | 8MGT-2200-62 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-830440 |