We never sell your data to third parties
NTN 6018LLBC3/EM is a 60 series single-row deep groove ball bearing with a 90 mm straight bore. It features double non-contact rubber seals (LLB), a machined brass cage (EM), and C3 clearance. Constructed from high carbon chrome steel, it is designed for electric motors, pumps, and general rotating machinery.
MODEL 6018LLBC3/EM
$278.18 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Axial static load rating
11128 lbf
Axial Static Load Rating
11128 lbf
B (in)
0.9450
Ball material
Through hardened steel
Ball Material
Through Hardened Steel
Bore type
0
Bore Type
0
Cage material
Pressed steel
Cage Material
Pressed Steel
Cage type
Pressed
Cage Type
Pressed
Clearance
C3
Configuration
One
d (in)
3.5430
D (in)
5.5120
da max
4.0157 in
Da max
5.1969 in
da min
3.8583 in
Dynamic load rating
14501 lbf
Dynamic Load Rating
14501 lbf
Enclosure
Non-Contact Seal - Both Sides
Factor
15.6
Height
5.512
I.D.
90 mm
Length
5.512
Limiting speed - grease
4700 RPM
Limiting Speed - Grease
4700 RPM
Material
High Carbon Chrome Steel
O.D.
140 mm
Operating temperature range
-40 to 250 ºF
Operating Temperature Range
-40 to 250 °F
Outside Ring Type
0
Precision
ISO Class 0
r (in)
0.0591
r1
0.0197 in
Radial Dynamic Load Rating
14500 lbf
Radial internal clearance
0
Radial Internal Clearance
0
ras max
0.0591 in
Seal material
Nitrile rubber
Seal Material
Nitrile Rubber
Seal type
Non-Contact
Seal Type
Non-Contact
Static load rating
11129 lbf
Static Load Rating
11129 lbf
Type
Deep Groove Ball Bearing
Width
0.9449
Technical Specifications
Type | Deep Groove Ball Bearing |
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Grease | 4700 RPM |
Seal Type | Non-Contact |
Seal Material | Nitrile Rubber |
Precision | ISO Class 0 |
Configuration | One |
Factor | 15.6 |
Radial Internal Clearance | C3 |
Static Load Rating | 11100 lbf49500 N49.50 kN |
Dynamic Load Rating | 13000 lbf58000 N58.00 kN |
Enclosure | Double Sealed |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 3.5433 in90.000 mm |
D | 5.5118 in140.000 mm |
B | 0.9449 in24.000 mm |
r | 0.0591 in1.500 mm |
r1 | 0.0197 in0.500 mm |
da min | 3.8583 in98.000 mm |
da max | 4.0157 in102.000 mm |
Da max | 5.1969 in132.000 mm |
ras max | 0.0591 in1.500 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#5033437
Brand
NSK Bearings
Model
6018VVC3
| Brand | PEER Bearing |
| Model | W6206-2RLD |
| Brand | Dormer Pramet |
| Model | 6706519 |
| Brand | Bestorq |
| Model | 776-8M-20 |
