We never sell your data to third parties
NTN XLS8-3/4SSH is a single-row deep groove ball bearing with a 3/4 in straight bore and double shielded design. The bearing features steel shields on both sides for protection against contaminants while retaining grease. Suitable for general industrial applications including electric motors, pumps, and fans.
MODEL XLS8-3/4SSH
$2,028.39 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
B (in)
1.5000
Ball material
Steel
Ball Material
Steel
Bore type
Round
Bore Type
Round
Cage material
Steel
Cage Material
Steel
Cage type
Pressed
Cage Type
Pressed
Configuration
One
D (in)
11.7500
d (in)
8.8050
Dynamic load rating
0 lbf
Dynamic Load Rating
0 lbf
Enclosure
Double Shielded
I.D.
223.647 mm
Material
High Carbon Chrome
O.D.
298.45 mm
Operating temperature range
-40 to 250 ºF
Operating Temperature Range
-40 to 250 °F
Precision
Class 0
r (in)
0.0200
Radial internal clearance
CN
Radial Internal Clearance
CN
Seal material
None
Seal type
None
Static load rating
33000 lbf
Static Load Rating
33000 lbf
Type
Miniature / Extra Small Ball Bearing
Technical Specifications
Type |
Miniature / Extra Small Ball Bearing |
Bore Type |
Round |
Material |
High Carbon Chrome |
Cage Type |
Pressed |
Cage Material |
Steel |
Ball Material |
Steel |
Seal Type |
None |
Seal Material |
None |
Precision |
Class 0 |
Configuration |
One |
Radial Internal Clearance |
CN |
Static Load Rating |
33000 lbf146784 N146.78 kN |
Dynamic Load Rating |
0 lbf |
Enclosure |
Double Shielded |
Operating Temperature Range |
-40 to 250 F-40 to 120 C |
Dimensional Specifications
|
|
|
d |
8.8050 in223.647 mm |
D |
11.7500 in298.450 mm |
B |
1.5000 in38.100 mm |
r |
0.0200 in0.508 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Fasco |
| Model | KIT 100 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-728043 |
| Brand | Bestorq |
| Model | 5VK2000 |