We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Rexnord MGT952157 ZGT5000 center pull elevator head take-up assembly with a 2-15/16 in (74.61 mm) bore mounted spherical roller bearing. Features a double setscrew locking collar and spring-loaded heavy contact seal for reliable performance in elevator and conveyor applications.
MODEL 10422920
Contact supplier for technical support on: 800-626-2120
$9,549.76 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ability to Relubricate
Yes
Adjusting screw thread size
1 1/2-6 NC
Allowable Working Load [2/3 Yield Strength] (lb)
26800
Available end cap
DTC9
Available End Cap
DTC9
Available Seal Type
K Light Contact Lip Seal; M Spring Loaded Heavy Contact Lip Seal (Buna and Viton); Z Clearance Seal; G Triple Lip
Base to centerline height (in)
4.625
Bearing Brand
REX ROLLER BEARING
Bolt Hole Spacing [Width] (in)
2.5
Bolt Size (in)
5/8
Bore size (in)
2.9375 in
Bore Size (in)
2.9375 in
Cage Material
Engineered Polymer
Clearance
C3 STANDARD
Distance between bolt holes (in)
12
Distance from Bearing Centerline to End of Rod (in)
17.88
Fixed vs. Expansion
Fixed
Foot Height (in)
0.75
Frame
ZGT97
Frame height (in)
20.88
Frame length (in)
14.5
Frame Material
Welded Steel
Frame type
Center Pull Elevator Head Assembly
Frame Width (in)
5
Frame Width at Top of Frame (in)
5.25
Grease Fitting Thread Size
1/8 NPT
Housing coating
Powder coated
Housing Coating
POWDER COATED
Housing construction
Solid
Housing Construction
Solid
Housing material
Cast iron
Housing Material
Cast Iron
Housing style
Take-Up Assembly
Housing Style
Take-Up Assembly
Housing type
Take-Up Assembly
Housing Type
Take-Up Assembly
Insert
5215U
Length Through Bore (in)
4.88
Locking device kit
SC9 QTY 2
Locking Device Kit
SC9 QTY 2
Locking Type
Double Set Collar
Lubrication type
EXXON RONEX MP STD
Lubrication Type
EXXON RONEX MP STD
Maximum Speed (RPM)
1700 rpm
Maximum Temperature (C)
107
Maximum Temperature (F)
225
Microlock kit
ML3
Misalignment Capability
±2.0° Misalignment - Dynamic
Misalignment Type
Dynamic
Net Weight
100.00
Overall Height (in)
22.51
Overall Length (in)
14.5
Overall rod length (in)
15.5
Overall width
5.25
Primary seal
Buna spring loaded lip seal
Primary Seal
BUNA SPRING LOADED LIP SEAL
Radial Dynamic Load Capacity (lb)
57750 lb
Radial Static Load Capacity (lb)
71500 lb
Retainer material
Engineered Polymer
Retainer Material
Engineered Polymer
Rolling element
Spherical Roller
Seal kit
MS9
Seal type
Heavy Contact Seal
Setscrew torque (in-lbs)
680
Size code
9
Size Code
9
Take-up block
MT95215
Take-up Block
MT95215
Travel length (in)
7
Vibration frequency fundamental train
0.0072 cps
Vibration Frequency Fundamental Train
0.0072 cps
Vibration frequency inner ring defect
0.1701 cps
Vibration Frequency Inner Ring Defect
0.1701 cps
Vibration frequency outer ring defect
0.1299 cps
Vibration Frequency Outer Ring Defect
0.1299 cps
Vibration frequency roller spin
0.0591 cps
Vibration Frequency Roller Spin
0.0591 cps
Weight unit
LB
2 15/16" Mounted Spherical Roller Bearing, Center Pull Elevator Head Take-up Assembly, Double Setscrew Locking Collar, Spring Loaded Heavy Contact Seal
SKU: 495479
Good orice
This stump grinder wheel bearing is expensive and I need two each time I change them. Best price I found anywhere and free shipping here at MRO Supply
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | SMC |
| Model | CDM2B32-75AZ |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-532534 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-581598 |
| Brand | Gates Rubber |
| Model | 900-5MGT-15 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-876186 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-221028 |
SKU: 495479
Good orice
This stump grinder wheel bearing is expensive and I need two each time I change them. Best price I found anywhere and free shipping here at MRO Supply
Read more