We never sell your data to third parties
Timken 2MM208WI SUM super precision angular contact ball bearing, 40mm bore, duplex medium preload (SUM), ABEC 7 (P4S) precision class. Matched pair for back-to-back or face-to-face mounting in machine tool spindles, precision grinders, and high-speed applications. Provides high rotational accuracy and rigidity.
MODEL 2MM208WI SUM
Returnable: Yes
0.7087 in C0 - Static Radial Rating (per row)
23800 N
0.7087 in World part number
7208C-T-P4S-SUM
1.860 in Limiting Speed (Grease) (per row)
19300 RPM Limiting speed (oil):38600 RPM Manufacturing part number:2MM208WI SUM O.D. (in):80 mm 3.1496 Outer ring backing diameter:73.2 mm
2.880 in Precision rating
ISO P4S (ABEC 7/9) Rows per set:Single Total width:18 mm
5340 lbf C1 ISO - Dynamic Radial Rating (per row)
36700 N
8240 lbf Cage type
CR - Phenolic Outer Land Riding Cage Contact angle:15 Design units:Metric Inner ring backing diameter:47.2 mm
Ball type
Steel Bearing width:18 mm
Ball Type
STEEL
Bearing Width
18 mm 0.7087 in
Bore
40 mm
C0 - Static Radial Rating (per row)
23800 N 5340 lbf
C1 ISO - Dynamic Radial Rating (per row)
36700 N 8240 lbf
Cage Type
CR - Phenolic Outer Land Riding Cage
Ce - Dynamic Radial Rating (per row)
40400 N 9070 lbf
Contact Angle
15 º
d - Bore
40 mm
D - Outer Diameter
80 mm 3.1496 in
da - Inner Ring Backing Diameter
47.2 mm 1.860 in
Da - Outer Ring Backing Diameter
73.2 mm 2.880 in
Design Units
Metric
DOuter Ring Backing Diameter
73.2 mm 2.880 in
Dynamic Radial Rating (per row)
40400 N 9070 lbf
I.D.
40 mm
Inner Ring 'To Clear' Radius
1 mm 0.039 in
Inner Ring Backing Diameter
47.2 mm 1.860 in
Limiting Speed (Grease) (per row)
19300 rpm
Limiting Speed (Oil)
38600 rpm
Manufacturing Part Number
2MM208WI SUM
Outer Diameter
80 mm 3.1496 in
Outer Ring 'To Clear' Radius
1 mm 0.039 in
Precision Rating
ISO P4S (ABEC 7/9)
R - Inner Ring "To Clear" Radius
1 mm 0.039 in
r - Outer Ring "To Clear" Radius
1 mm 0.039 in
Rows per Set
Single
Static Radial Rating (per row)
23800 N 5340 lbf
Total Width
18 mm 0.7087 in
World Part Number
7208C-T-P4S-SUM
LIGHT ISO 02 SERIES
HIGH PRECISION MV
Running accuracy, performance and dimensional controls conform to ABEC 7 (ISO P4) requirements.
SUPER PRECISION MM
Running accuracy and performance meet ABEC 9 (ISO P2) levels. Other features conform to ABEC 7 (ISO P4) requirements.
WI CONSTRUCTION
- Incorporates low shoulder on non-thrust side of both inner and outer rings.
- Balls separated by one-piece cage piloted against a ground thrust shoulder land of the outer ring.
- Optional one-piece cage piloted on the ball available with MV (P4) product.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Regal Cutting Tools |
| Model | 011529AW |
| Brand | Cooper Wiring |
| Model | AHMC240L-1 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more