We never sell your data to third parties
Timken 2MM9315WI DUM super precision angular contact ball bearing, duplex set with medium preload (DUM), P4S/ABEC 7 precision class. Designed for high-speed, high-rigidity machine tool spindles, precision grinders, and jig borers. Duplex back-to-back arrangement provides precise axial location and stiffness under combined radial and thrust loads.
MODEL 2MM9315WI DUM
$1,796.21 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
0.6299 in C0 - Static Radial Rating (per row)
30300 N
1.2598 in World part number
71915C-T-P4S-DUM
3.190 in Limiting Speed (Grease) (per row)
12300 rpm Limiting speed (oil):24600 rpm Manufacturing part number:2MM9315WI DUM O.D. (in):105 mm 4.1339 Outer ring backing diameter:99.4 mm
3.910 in Precision rating
ISO P4S (ABEC 7/9) Rows per set:Duplex Total width:32 mm
6640 lbf Cage type
CR - Phenolic Outer Land Riding Cage Contact angle:15 Design units:Metric Inner ring backing diameter:81.1 mm
6810 lbf C1 ISO - Dynamic Radial Rating (per row)
29500 N
Ball type
Steel Bearing width:16 mm
Ball Type
STEEL
Bearing Width
16 mm 0.6299 in
Bore
75 mm
C0 - Static Radial Rating (per row)
30300 N 6810 lbf
C1 ISO - Dynamic Radial Rating (per row)
29500 N 6640 lbf
Cage Type
CR - Phenolic Outer Land Riding Cage
Ce - Dynamic Radial Rating (per row)
32500 N 7310 lbf
Contact Angle
15 º
d - Bore
75 mm
D - Outer Diameter
105.000 mm 4.1339 in
da - Inner Ring Backing Diameter
81.1 mm 3.190 in
Da - Outer Ring Backing Diameter
99.4 mm 3.910 in
Design Units
Metric
DOuter Ring Backing Diameter
99.4 mm 3.910 in
Dynamic Radial Rating (per row)
32500 N 7310 lbf
I.D.
75 mm
Inner Ring 'To Clear' Radius
1 mm 0.039 in
Inner Ring Backing Diameter
81.1 mm 3.190 in
Limiting Speed (Grease) (per row)
12300 rpm
Limiting Speed (Oil)
24600 rpm
Manufacturing Part Number
2MM9315WI DUM
Outer Diameter
105.000 mm 4.1339 in
Outer Ring 'To Clear' Radius
1 mm 0.039 in
Precision Rating
ISO P4S (ABEC 7/9)
R - Inner Ring "To Clear" Radius
1 mm 0.039 in
r - Outer Ring "To Clear" Radius
1 mm 0.039 in
Rows per Set
Duplex
Static Radial Rating (per row)
30300 N 6810 lbf
Total Width
32 mm 1.2598 in
World Part Number
71915C-T-P4S-DUM
SPINDLE BEARINGS ULTRA-LIGHT ISO 19 SERIES
HIGH PRECISION MV
Running accuracy, performance and dimensional controls conform to ABEC 7 (ISO P4) requirements.
SUPER PRECISION MM
Running accuracy and performance meet ABEC 9 (ISO P2) levels. Other features conform to ABEC 7 (ISO P4) requirements.
WI CONSTRUCTION
- Incorporates low shoulder on non-thrust side of outer rings.
- Balls separated by one-piece cage piloted against a ground thrust shoulder land of the outer ring.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Superlok |
| Model | SN-3 |
| Brand | Martin Sprocket |
| Model | 50BTB12H |
| Brand | Consolidated Bearings |
| Model | 52206 |
| Brand | Consolidated Bearings |
| Model | 54317-U |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more