We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Timken 9115K is a deep groove radial ball bearing for general industrial applications. It features a standard radial internal clearance and is designed for moderate loads and speeds. This bearing is suitable for electric motors, pumps, and HVAC equipment where reliable radial load support is required. The bearing has a dynamic load rating of 10000 lbf and a static load rating of 7350 lbf.
MODEL 9115K
$163.15 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
0.7874 in Design units
Metric Dynamic radial rating:10000 lbf Inner ring to clear radius:0.043 in Inner ring backing diameter:79.00 mm
3.110 in Limiting speed (grease)
3160 RPM Limiting speed (oil):3680 RPM Manufacturing part number:9115KC3 O.D. (in):115 mm 4.528 Outer ring to clear radius:0.043 in Outer ring backing diameter:108.00 mm
4.250 in Static radial rating
33451 N
Ball diameter
0.468750 in
Ball type
Steel
Bearing width
0.7874 in
Design units
METRIC
Dynamic radial rating
10000 lbf
I.D.
2.9528 in
Inner ring "to clear" radius
0.043 in
Inner ring backing diameter
3.110 in
Limiting speed (grease)
3160 rpm
Limiting speed (oil)
3680 rpm
O.D.
4.5276 in
Outer ring "to clear" radius
0.043 in
Outer ring backing diameter
4.250 in
Static radial rating
7350 lbf
Radial ball bearings consist of an inner and outer ring with a cage containing a complement of precision balls. The standard Conrad-type bearing has a deep-groove construction capable of handling radial and axial loads from either direction in versatile designs that permit relatively high-speed operation.
In addition to standard single-row deep groove bearings, Timken offers special designs, including a maximum capacity series and an extra large (XLS) radial series bearing.
Size range: 3 mm - 600 mm (0.12 in. - 23.62 in.) bore
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | PIP |
| Model | 700KSLC/S |
| Brand | Magnetics |
| Model | NE7537NP35 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more