We never sell your data to third parties
Timken 36PP is a deep groove radial ball bearing designed for general industrial applications. This bearing falls within the <12 inch outside diameter class, suitable for moderate loads and speeds in machinery such as electric motors, pumps, and conveyors. Its deep groove geometry accommodates both radial and light axial loads.
MODEL 36PP
$22.57 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
0.236 in Design units
Metric Inner ring backing diameter:9.14 mm
0.3600 in Limiting speed (grease)
23528 rpm Limiting speed (oil):27449 rpm Manufacturing part number:36PP Z1 FS50000 O.D. (in):19 mm 0.748 Outer ring backing diameter:17.02 mm
0.6700 in Static radial rating
900 N
Ball type
Steel Bearing width:6 mm
Ball Type
STEEL
Bearing Width
6 mm 0.236 in
Bore
6 mm
Design Units
Metric
DOuter Ring Backing Diameter
17.02 mm 0.6700 in
Dynamic Radial Rating
2480 N 560 lbf
I.D.
6 mm
Inner Ring 'To Clear' Radius
0.30 mm 0.012 in
Inner Ring Backing Diameter
9.14 mm 0.3600 in
Limiting Speed (Grease)
23528 rpm
Limiting Speed (Oil)
27449 rpm
Manufacturing Part Number
36PP Z1 FS50000
Outer Diameter
19 mm 0.74803 in
Outer Ring 'To Clear' Radius
0.3 mm 0.012 in
Static Radial Rating
900 N 200 lbf
Radial ball bearings consist of an inner and outer ring with a cage containing a complement of precision balls. The standard Conrad-type bearing has a deep-groove construction capable of handling radial and axial loads from either direction in versatile designs that permit relatively high-speed operation.
In addition to standard single-row deep groove bearings, Timken offers special designs, including a maximum capacity series and an extra large (XLS) radial series bearing.
Size range: 3 mm - 600 mm (0.12 in. - 23.62 in.) bore
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | System Plast |
| Model | AA2500875 |
| Brand | Precision Twist Drill |
| Model | R511.5/8 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more