We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
TIMKEN SDAF 22244 SRB Pillow Block Assembly
MODEL SDAF 22244
Call for Pricing - 888-671-2883
Typically Ships in: 1 day
Returnable: Yes
117.475 mm Cage material
Stamped Steel Cage-cone backface clearance:0.5 in
12.7 mm Cone backface backing diameter
16.77 in
426 mm Cone part number
EE234154 Cone width:2.4063 in
515.62 mm Cup outer diameter
21.5000 in
546.1 mm Cup part number
234216D Design unit:Inch Related Assembly Number(s):EE234154-90121 EE234154-90150 Series:234000 T - Bearing Width across Cones:6.2499 in
61.120 mm Cup frontface backing diameter
20.31 in
A
9.5 in
A (in)
9.5000
Assembly weight
650.000 lb
B
32 in
B (in)
32.0000
Bearing number
22244
Bearing Number
22244
Bolt hole length
2.625 in
Bolt Hole Length
2.625 in
Bolt hole width
1.5 in
Bolt Hole Width
1.5 in
C
11.25 in
C (in)
11.2500
C - Double Cup Width
4.6250 in
C0 - Static Radial Rating
520000 lbf 2310000 N
C1(2) - Dynamic Radial Rating (Two-Rows)
415000 lbf 1850000 N
Cg - Geometry Factor
0.1057
D
3.5 in
D (in)
3.5000
Diameter
9 9/16 in
Diameter S-2
9 9/16 in
Diameter S-3
8 5/16 in
e - ISO Factor
0.27
E Max.
27.875 in
E Min.
25.625 in
F
7.25 in
F (in)
7.25
Full Timken Part Number
SDAF22244
H
19.25 in
H (in)
19.2500
Housing only
SDAF244
Housing Only
SDAF244
L
11.875 in
L (in)
11.875
Locknut
AN44
Lockwasher
W44
Max
27.8750 in
Min
25.6250 in
No of base bolts required
4
No. of Base Bolts Required
4
Oil level
3.3750 in
Oil Level K
3.375 in
Reference Thermal Speed Rating (Grease)
1300 rpm
Reference Thermal Speed Rating (Oil)
1500 rpm
Size of base bolts required
1.5 in
Size of Base Bolts Required
1 1/2
Stabilizing Ring 1 Req'd
SR-44-38
Stabilizing ring 1 req’d
SR-44-38
Triple seal 2 req’d
LER239
Triple Seal 2 Req’d at S-2
LOR248
Triple Seal 2 Req’d at S-3
LOR239
Y
3.5313 in
Y0 - ISO Factor
2.45
Y1 - ISO Factor
2.51
Y2 - ISO Factor
3.73
- Each assembly includes the housing cap and base, cap bolts, bearing, locknut and washer, stabilizing ring, and triple ring seals.
- To order pillow block housing only, use the numbers listed in the "Housing Only" column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
- Assembly and pillow blocks described on this page constitute fixed units.
- To order float units, specify part number plus suffix "Float" or "FL".
- If one end closed assembly is required, specify “CL” in assembly number when ordering.
- All assemblies shown are furnished in cast iron. If cast steel is desired, add the letter "S" to the alpha prefix (e.g., SDAFS 22220).
Note: Speed ratings are found in dimension tables in the spherical roller bearing section.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more
| Brand | WEG |
| Model | UMBW-1C3-1.5 |
| Brand | Hubbell Wiring |
| Model | SP15DR3B |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more