We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Timken HJ-11614648 is a single row cylindrical roller bearing (CRB) for general industrial applications. This bearing is designed for applications requiring high radial load capacity and moderate speeds. It falls within the under 12 inch outside diameter size class, suitable for various machinery and power transmission equipment.
MODEL HJ-11614648
$1,299.24 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
0.12 in Dimension C/B
76.2 mm
184.099 in Min. Mounting Dimensions Clearance Fit 1
184.120 mm
253000 lbf Thermal speed ratings - grease
1600 RPM Thermal speed ratings - oil:1800 rpm Used with Inner Ring Designation:IR-9611648
3.0000 in Max. Mounting Dimensions Clearance Fit 1
184.15 mm
7.2468 in O.D. (in)
231.775 mm 9.1250 Shaft Diameter (F:184.15 mm
7.2488 in Min. Mounting Dimensions Clearance Fit 2
231.775 mm
7.25 in Max. Mounting Dimensions Clearance Fit 2
231.821 mm
7.25 in Shoulder Diameter D
216.00 mm
8.500 in Static load rating
1130000 N
9.1226 in Max. Mounting Dimensions Tight Transition Fit S
7.2480 mm
9.1244 in Min. Mounting Dimensions Tight Transition Fit S
184.069 mm
9.125 in Min. Mounting Dimensions Tight Transition Fit H
231.760 mm
9.1268 in Max. Mounting Dimensions Tight Transition Fit H
231.714 mm
Chamfer
3.050 mm
Chamfer r
3.050 mm 0.12 in
Dynamic Load Rating C
524000 N 118000 lbf
Geometry Factor C
0.1586
Outer Diameter
231.775 mm 9.1250 in
Shaft Diameter (F
184.15 mm 7.25 in
Shoulder Diameter D
216.00 mm 8.500 in
Static Load Rating C
1130000 N 253000 lbf
Thermal Speed Ratings - Grease
1600 rpm
Thermal Speed Ratings - Oil
1800 rpm
Used with Inner Ring Designation
IR-9611648
- Clearance fit suggested for outer ring when housing is stationary relative to load.
- Tight transition fit suggested if housing rotates relative to load.
- Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
- Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
- Meets Military Standard MS 51961.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more