We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
TIMKEN SDAF 22534 SRB Pillow Block Assembly
MODEL SDAF 22534
Call for Pricing - 888-671-2883
Typically Ships in: 1 day
Returnable: Yes
0 mm Cage-cone frontface clearance
0.1 in
14.288 mm D1 - Flange Outer Diameter
3.3085 in
18.258 mm Cup frontface backing diameter
3.11 in
2.5 mm Cone backface backing diameter
2.28 in
3.175 mm Cage material
Stamped Steel Cage-cone backface clearance:0 in
56 mm Cone part number
L305649 Cone width:0.7188 in
58 mm Cone frontface backing diameter
2.2 in
78.99 mm Cup outer diameter
3.1875 in
80.963 mm Cup part number
L305610-B Cup width:0.5625 in
A
7.0625 in
Adapter Assembly Number
SNW-34 x 5-15/16
B
24.75 in
Bearing Number
22234K
Bolt Hole Length
2.375 in
Bolt Hole Width
1.25 in
C
9 in
C0 - Static Radial Rating
359000 lbf 1590000 N
C1 - Cup Flange Width
0.1250 in
C1(2) - Dynamic Radial Rating (Two-Rows)
290000 lbf 1290000 N
Cg - Geometry Factor
0.0901
D
2.5 in
Diameter S-1
5 15/16 in
e - ISO Factor
0.26
E Max.
21.625 in
E Min.
19.375 in
F
5.5 in
Full Timken Part Number
SDAF22534
H
14.25 in
Housing Only
SDAF534
L
9.625 in
No. of Base Bolts Required
4
Oil Level K
2.3125 in
Reference Thermal Speed Rating (Grease)
1700 rpm
Reference Thermal Speed Rating (Oil)
2000 rpm
Size of Base Bolts Required
1 1/4
Stabilizing Ring 1 Req'd
SR-34-0
Triple Seal Req'd
LOR 140
Y
2.9219 in
Y0 - ISO Factor
2.55
Y1 - ISO Factor
2.61
Y2 - ISO Factor
3.89
- Each assembly includes the housing cap and base, cap bolts, bearing, bearing adapter, locknut and lockwasher, stabilizing ring and triple ring seals.
- To order pillow block housing only, use the number listed in the "Housing Only" column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
- Assembly and pillow blocks as described on this page constitute fixed units.
- To order float units, specify part number plus suffix "Float" or "FL".
- If one end closed assembly is required, specify “CL” in assembly number when ordering.
- Assemblies shown are furnished in cast iron. If cast steel is desired, add the letter "S" to the alpha prefix (e.g., SDAFS 22515).
When ordering non-standard pillow block assemblies specify the shaft size.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more
| Brand | Ringfeder |
| Model | 4051-125SR |
| Brand | Dormer Pramet |
| Model | 5967013 |
| Brand | Ringfeder |
| Model | 4051-260HT |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more