We never sell your data to third parties
Timken 2MM9130WI QUM super precision angular contact ball bearing, quadruplex set with medium preload (QUM). ABEC 7 (P4S) precision class for high-rigidity machine tool spindles and high-speed applications requiring extreme rotational accuracy and minimal runout. Quadruplex arrangement provides maximum axial and radial load capacity in a compact assembly.
MODEL 2MM9130WI QUM
Returnable: Yes
1.378 in C0 - Static Radial Rating (per row)
168100 N
34200 lbf Cage type
CR - Phenolic Outer Land Riding Cage Contact angle:15 Design units:Metric Inner ring backing diameter:165.2 mm
37800 lbf C1 ISO - Dynamic Radial Rating (per row)
152000 N
5.512 in World part number
7030C-T-P4S-QUM
6.510 in Limiting Speed (Grease) (per row)
5600 rpm Limiting speed (oil):11200 rpm Manufacturing part number:2MM9130WI QUM O.D. (in):225 mm 8.8583 Outer ring backing diameter:210.7 mm
8.300 in Precision rating
ISO P4S (ABEC 7/9) Rows per set:Quadruplex Total width:140 mm
Ball type
Steel Bearing width:35 mm
Ball Type
STEEL
Bearing Width
35 mm 1.3780 in
Bore
150 mm
C0 - Static Radial Rating (per row)
168100 N 37800 lbf
C1 ISO - Dynamic Radial Rating (per row)
152000 N 34200 lbf
Cage Type
CR - Phenolic Outer Land Riding Cage
Ce - Dynamic Radial Rating (per row)
167200 N 37600 lbf
Contact Angle
15 º
d - Bore
150 mm
D - Outer Diameter
225 mm 8.8583 in
da - Inner Ring Backing Diameter
165.2 mm 6.510 in
Da - Outer Ring Backing Diameter
210.7 mm 8.3000 in
Design Units
Metric
DOuter Ring Backing Diameter
210.7 mm 8.3000 in
Dynamic Radial Rating (per row)
167200 N 37600 lbf
I.D.
150 mm
Inner Ring 'To Clear' Radius
2 mm 0.079 in
Inner Ring Backing Diameter
165.2 mm 6.510 in
Limiting Speed (Grease) (per row)
5600 rpm
Limiting Speed (Oil)
11200 rpm
Manufacturing Part Number
2MM9130WI QUM
Outer Diameter
225 mm 8.8583 in
Outer Ring 'To Clear' Radius
2 mm 0.079 in
Precision Rating
ISO P4S (ABEC 7/9)
R - Inner Ring "To Clear" Radius
2 mm 0.079 in
r - Outer Ring "To Clear" Radius
2 mm 0.079 in
Rows per Set
Quadruplex
Static Radial Rating (per row)
168100 N 37800 lbf
Total Width
140.000 mm 5.512 in
World Part Number
7030C-T-P4S-QUM
EXTRA-LIGHT ISO 10 SERIES
HIGH PRECISION MV
Running accuracy, performance and dimensional controls conform to ABEC 7 (ISO P4) requirements.
SUPER PRECISION MM
Running accuracy and performance meet ABEC 9 (ISO P2) levels. Other features conform to ABEC 7 (ISO P4) requirements.
WI CONSTRUCTION
- Incorporates low shoulder on non-thrust side of both inner and outer rings.
- Balls separated by one-piece cage piloted against a ground thrust shoulder land of the outer ring.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Remke |
| Model | RSR-2100-W |
| Brand | Pramet |
| Model | TN 16NL080ACME:T8030 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more