We never sell your data to third parties
Timken 2MMC9103WI DUM is a super precision angular contact ball bearing configured as a duplex set with medium preload (DUM). This P4S (ABEC 7/9) class bearing is designed for high-speed, high-rigidity applications such as machine tool spindles, precision grinders, and jig borers. The duplex arrangement provides precise axial location and stiffness under combined loads.
MODEL 2MMC9103WI DUM
Returnable: Yes
0.3937 in C0 - Static Radial Rating (per row)
3030 N
0.7874 in World part number
C7003C-T-P4S-DUM
0.850 in Limiting Speed (Grease) (per row)
51720 rpm Limiting speed (oil):103440 rpm Manufacturing part number:2MMC9103WI DUM O.D. (in):35 mm 1.378 Outer ring backing diameter:31.1 mm
1.230 in Rows per set
Duplex Total width:20 mm
1400 lbf Cage type
CR - Phenolic Outer Land Riding Cage Contact angle:15 Design units:Metric Inner ring backing diameter:21.5 mm
685 lbf C1 ISO - Dynamic Radial Rating (per row)
6220 N
Ball type
Ceramic Bearing width:10 mm
Ball Type
Ceramic
Bearing Width
10 mm 0.3937 in
Bore
17 mm
C0 - Static Radial Rating (per row)
3030 N 685 lbf
C1 ISO - Dynamic Radial Rating (per row)
6220 N 1400 lbf
Cage Type
CR - Phenolic Outer Land Riding Cage
Ce - Dynamic Radial Rating (per row)
6800 N 1530 lbf
Contact Angle
15 º
d - Bore
17 mm
D - Outer Diameter
35 mm 1.3780 in
da - Inner Ring Backing Diameter
21.5 mm 0.850 in
Da - Outer Ring Backing Diameter
31.1 mm 1.230 in
Design Units
Metric
DOuter Ring Backing Diameter
31.1 mm 1.230 in
Dynamic Radial Rating (per row)
6800 N 1530 lbf
I.D.
17 mm
Inner Ring 'To Clear' Radius
0.30 mm 0.012 in
Inner Ring Backing Diameter
21.5 mm 0.850 in
Limiting Speed (Grease) (per row)
51720 rpm
Limiting Speed (Oil)
103440 rpm
Manufacturing Part Number
2MMC9103WI DUM
Outer Diameter
35 mm 1.3780 in
Outer Ring 'To Clear' Radius
0.3 mm 0.012 in
R - Inner Ring "To Clear" Radius
0.30 mm 0.012 in
r - Outer Ring "To Clear" Radius
0.3 mm 0.012 in
Rows per Set
Duplex
Static Radial Rating (per row)
3030 N 685 lbf
Total Width
20 mm 0.7874 in
World Part Number
C7003C-T-P4S-DUM
EXTRA-LIGHT ISO 10 SERIES
HIGH PRECISION MV
Running accuracy, performance and dimensional controls conform to ABEC 7 (ISO P4) requirements.
SUPER PRECISION MM
Running accuracy and performance meet ABEC 9 (ISO P2) levels. Other features conform to ABEC 7 (ISO P4) requirements.
WI CONSTRUCTION
- Incorporates low shoulder on non-thrust side of both inner and outer rings.
- Balls separated by one-piece cage piloted against a ground thrust shoulder land of the outer ring.
- Optional one-piece cage piloted on the ball available with MV (P4) product.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more