We never sell your data to third parties
Timken 2MMC9104WI SUM is a super precision angular contact ball bearing designed for high-speed machine tool spindles and precision grinding applications. This duplex set (SUM) features a 20mm bore, medium preload, and ABEC 7 (P4S) precision class for exceptional running accuracy and rigidity. The matched pair configuration provides axial location and is suitable for back-to-back (DB) or face-to-face (DF) mounting arrangements in demanding industrial environments.
MODEL 2MMC9104WI SUM
Returnable: Yes
0.4724 in C0 - Static Radial Rating (per row)
5350 N
0.4724 in World part number
C7004C-T-P4S-SUM
0.980 in Limiting Speed (Grease) (per row)
44520 rpm Limiting speed (oil):89040 rpm Manufacturing part number:2MMC9104WI SUM O.D. (in):42 mm 1.6535 Outer ring backing diameter:37.7 mm
1.490 in Precision rating
ISO P4S (ABEC 7/9) Rows per set:Single Total width:12 mm
1200 lbf C1 ISO - Dynamic Radial Rating (per row)
10500 N
2370 lbf Cage type
CR - Phenolic Outer Land Riding Cage Contact angle:15 Design units:Metric Inner ring backing diameter:24.8 mm
Ball type
Ceramic Bearing width:12 mm
Ball Type
Ceramic
Bearing Width
12 mm 0.4724 in
Bore
20 mm
C1 ISO - Dynamic Radial Rating (per row)
10500 N 2370 lbf
Cage Type
CPhenolic Outer Land Riding Cage
Contact Angle
15 º
Design Units
Metric
DOuter Ring Backing Diameter
37.7 mm 1.490 in
Dynamic Radial Rating (per row)
11600 N 2610 lbf
I.D.
20 mm
Inner Ring 'To Clear' Radius
0.6 mm 0.024 in
Inner Ring Backing Diameter
24.8 mm 0.980 in
Limiting Speed (Grease) (per row)
44520 rpm
Limiting Speed (Oil)
89040 rpm
Manufacturing Part Number
2MMC9104WI SUM
Outer Diameter
42 mm 1.6535 in
Outer Ring 'To Clear' Radius
0.6 mm 0.024 in
Precision Rating
ISO P4S (ABEC 7/9)
Rows per Set
Single
Static Radial Rating (per row)
5350 N 1200 lbf
Total Width
12 mm 0.4724 in
World Part Number
C7004C-T-P4S-SUM
EXTRA-LIGHT ISO 10 SERIES
HIGH PRECISION MV
Running accuracy, performance and dimensional controls conform to ABEC 7 (ISO P4) requirements.
SUPER PRECISION MM
Running accuracy and performance meet ABEC 9 (ISO P2) levels. Other features conform to ABEC 7 (ISO P4) requirements.
WI CONSTRUCTION
- Incorporates low shoulder on non-thrust side of both inner and outer rings.
- Balls separated by one-piece cage piloted against a ground thrust shoulder land of the outer ring.
- Optional one-piece cage piloted on the ball available with MV (P4) product.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | MROSupply Fasteners |
| Model | FSTPCK-772276 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more