We never sell your data to third parties
Timken 2MMC9105WI QUM is a super precision angular contact ball bearing configured as a quadruplex set with medium preload (QUM). This ABEC 7 (P4S) precision class bearing is designed for high-rigidity machine tool spindles and high-speed applications requiring exceptional running accuracy and axial load capacity. The quadruplex arrangement provides maximum stiffness and load support for demanding industrial and precision machining operations.
MODEL 2MMC9105WI QUM
Returnable: Yes
0.4724 in C0 - Static Radial Rating (per row)
6590 N
1.180 in Limiting Speed (Grease) (per row)
37080 rpm Limiting speed (oil):74160 rpm Manufacturing part number:2MMC9105WI QUM O.D. (in):47 mm 1.8504 Outer ring backing diameter:42.6 mm
1.680 in Precision rating
ISO P4S (ABEC 7/9) Rows per set:Quadruplex Total width:48 mm
1.8896 in World part number
C7005C-T-P4S-QUM
1480 lbf C1 ISO - Dynamic Radial Rating (per row)
11700 N
2640 lbf Cage type
CR - Phenolic Outer Land Riding Cage Contact angle:15 Design units:Metric Inner ring backing diameter:29.9 mm
Ball type
Ceramic Bearing width:12 mm
Ball Type
Ceramic
Bearing Width
12 mm 0.4724 in
Bore
25 mm
C0 - Static Radial Rating (per row)
6590 N 1480 lbf
C1 ISO - Dynamic Radial Rating (per row)
11700 N 2640 lbf
Cage Type
CR - Phenolic Outer Land Riding Cage
Ce - Dynamic Radial Rating (per row)
12900 N 2910 lbf
Contact Angle
15 º
d - Bore
25 mm
D - Outer Diameter
47 mm 1.8504 in
da - Inner Ring Backing Diameter
29.9 mm 1.180 in
Da - Outer Ring Backing Diameter
42.6 mm 1.680 in
Design Units
Metric
DOuter Ring Backing Diameter
42.6 mm 1.680 in
Dynamic Radial Rating (per row)
12900 N 2910 lbf
I.D.
25 mm
Inner Ring 'To Clear' Radius
0.6 mm 0.024 in
Inner Ring Backing Diameter
29.9 mm 1.180 in
Limiting Speed (Grease) (per row)
37080 rpm
Limiting Speed (Oil)
74160 rpm
Manufacturing Part Number
2MMC9105WI QUM
Outer Diameter
47 mm 1.8504 in
Outer Ring 'To Clear' Radius
0.6 mm 0.024 in
Precision Rating
ISO P4S (ABEC 7/9)
R - Inner Ring "To Clear" Radius
0.6 mm 0.024 in
r - Outer Ring "To Clear" Radius
0.6 mm 0.024 in
Rows per Set
Quadruplex
Static Radial Rating (per row)
6590 N 1480 lbf
Total Width
48 mm 1.8896 in
World Part Number
C7005C-T-P4S-QUM
EXTRA-LIGHT ISO 10 SERIES
HIGH PRECISION MV
Running accuracy, performance and dimensional controls conform to ABEC 7 (ISO P4) requirements.
SUPER PRECISION MM
Running accuracy and performance meet ABEC 9 (ISO P2) levels. Other features conform to ABEC 7 (ISO P4) requirements.
WI CONSTRUCTION
- Incorporates low shoulder on non-thrust side of both inner and outer rings.
- Balls separated by one-piece cage piloted against a ground thrust shoulder land of the outer ring.
- Optional one-piece cage piloted on the ball available with MV (P4) product.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Hydraulic Technologies |
| Model | 202479 |
| Brand | PT Coupling |
| Model | 68143020 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more