We never sell your data to third parties
Timken 2MMC9109WI DUM super precision angular contact ball bearing, 45mm bore, duplex medium preload (DUM), ABEC 7 (P4S) precision. Designed for machine tool spindles and high-speed applications requiring high rigidity and running accuracy. Supports precise axial and radial loads in demanding industrial equipment.
MODEL 2MMC9109WI DUM
Returnable: Yes
0.6299 in C0 - Static Radial Rating (per row)
17180 N
1.2598 in World part number
C7009C-T-P4S-DUM
2.020 in Limiting Speed (Grease) (per row)
21480 rpm Limiting speed (oil):42960 rpm Manufacturing part number:2MMC9109WI DUM O.D. (in):75 mm 2.9528 Outer ring backing diameter:69.3 mm
2.730 in Precision rating
ISO P4S (ABEC 7/9) Rows per set:Duplex Total width:32 mm
3850 lbf C1 ISO - Dynamic Radial Rating (per row)
24500 N
5530 lbf Cage type
CR - Phenolic Outer Land Riding Cage Contact angle:15 Design units:Metric Inner ring backing diameter:51.3 mm
Ball type
Ceramic Bearing width:16 mm
Ball Type
Ceramic
Bearing Width
16 mm 0.6299 in
Bore
45 mm
C1 ISO - Dynamic Radial Rating (per row)
24500 N 5530 lbf
Cage Type
CPhenolic Outer Land Riding Cage
Contact Angle
15 º
Design Units
Metric
DOuter Ring Backing Diameter
69.3 mm 2.730 in
Dynamic Radial Rating (per row)
27000 N 6080 lbf
I.D.
45 mm
Inner Ring 'To Clear' Radius
1 mm 0.039 in
Inner Ring Backing Diameter
51.3 mm 2.020 in
Limiting Speed (Grease) (per row)
21480 rpm
Limiting Speed (Oil)
42960 rpm
Manufacturing Part Number
2MMC9109WI DUM
Outer Diameter
75 mm 2.9528 in
Outer Ring 'To Clear' Radius
1 mm 0.039 in
Precision Rating
ISO P4S (ABEC 7/9)
Rows per Set
Duplex
Static Radial Rating (per row)
17180 N 3850 lbf
Total Width
32 mm 1.2598 in
World Part Number
C7009C-T-P4S-DUM
EXTRA-LIGHT ISO 10 SERIES
HIGH PRECISION MV
Running accuracy, performance and dimensional controls conform to ABEC 7 (ISO P4) requirements.
SUPER PRECISION MM
Running accuracy and performance meet ABEC 9 (ISO P2) levels. Other features conform to ABEC 7 (ISO P4) requirements.
WI CONSTRUCTION
- Incorporates low shoulder on non-thrust side of both inner and outer rings.
- Balls separated by one-piece cage piloted against a ground thrust shoulder land of the outer ring.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more