We never sell your data to third parties
Timken 3MMC9126WI DUM super precision angular contact ball bearing, duplex matched set with medium preload. P4S-grade ABEC 7/9 precision for high rigidity and minimal runout in machine tool spindles, precision grinders, and high-speed applications requiring accurate axial location and smooth operation.
MODEL 3MMC9126WI DUM
Returnable: Yes
1.2992 in C0 - Static Radial Rating (per row)
115611 N
2.5984 in World part number
C7026E-T-P4S-DUM
25988 lbf C1 ISO - Dynamic Radial Rating (per row)
123000 N
27700 lbf Cage type
CR - Phenolic Outer Land Riding Cage Contact angle:25 Design units:Metric Inner ring backing diameter:144.2 mm
5.680 in Limiting Speed (Grease) (per row)
6960 RPM Limiting speed (oil):13920 rpm Manufacturing part number:3MMC9126WI DUM O.D. (in):200 mm 7.874 Outer ring backing diameter:186.6 mm
7.350 in Precision rating
ISO P4S (ABEC 7/9) Rows per set:Duplex Total width:66 mm
Ball type
Ceramic Bearing width:33 mm
Ball Type
Ceramic
Bearing Width
33 mm 1.2992 in
Bore
130 mm
C0 - Static Radial Rating (per row)
115611 N 25988 lbf
C1 ISO - Dynamic Radial Rating (per row)
123000 N 27700 lbf
Cage Type
CR - Phenolic Outer Land Riding Cage
Ce - Dynamic Radial Rating (per row)
135700 N 30500 lbf
Contact Angle
25 º
d - Bore
130 mm
D - Outer Diameter
200 mm 7.8740 in
da - Inner Ring Backing Diameter
144.2 mm 5.680 in
Da - Outer Ring Backing Diameter
186.6 mm 7.350 in
Design Units
Metric
DOuter Ring Backing Diameter
186.6 mm 7.350 in
Dynamic Radial Rating (per row)
135700 N 30500 lbf
I.D.
130 mm
Inner Ring 'To Clear' Radius
2 mm 0.079 in
Inner Ring Backing Diameter
144.2 mm 5.680 in
Limiting Speed (Grease) (per row)
6960 rpm
Limiting Speed (Oil)
13920 rpm
Manufacturing Part Number
3MMC9126WI DUM
Outer Diameter
200 mm 7.8740 in
Outer Ring 'To Clear' Radius
2 mm 0.079 in
Precision Rating
ISO P4S (ABEC 7/9)
R - Inner Ring "To Clear" Radius
2 mm 0.079 in
r - Outer Ring "To Clear" Radius
2 mm 0.079 in
Rows per Set
Duplex
Static Radial Rating (per row)
115611 N 25988 lbf
Total Width
66.000 mm 2.5984 in
World Part Number
C7026E-T-P4S-DUM
EXTRA-LIGHT ISO 10 SERIES
HIGH PRECISION MV
Running accuracy, performance and dimensional controls conform to ABEC 7 (ISO P4) requirements.
SUPER PRECISION MM
Running accuracy and performance meet ABEC 9 (ISO P2) levels. Other features conform to ABEC 7 (ISO P4) requirements.
WI CONSTRUCTION
- Incorporates low shoulder on non-thrust side of both inner and outer rings.
- Balls separated by one-piece cage piloted against a ground thrust shoulder land of the outer ring.
- Optional one-piece cage piloted on the ball available with MV (P4) product.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | MROSupply Fasteners |
| Model | FSTPCK-532424 |
| Brand | Bunting Bearings |
| Model | CB486050 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more