We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Rex ZNT9230012 is a 3" mounted spherical roller bearing in a top angle protected screw take-up assembly. The cast iron housing features a single setscrew locking collar and clearance seal. This Rex 2000 series normal duty unit provides reliable performance in conveyor and material handling applications.
MODEL 10416050
Contact supplier for technical support on: 800-626-2120
$3,395.09 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ability to Relubricate
Yes
Adjusting screw thread size
1-8 NC
Allowable Working Load [2/3 Yield Strength] (lb)
6800
Available end cap
DTC9
Available End Cap
DTC9
Available Seal Type
K Light Contact Lip Seal; M Spring Loaded Heavy Contact Lip Seal (Buna and Viton); Z Clearance Seal; G Triple Lip
Base to centerline height (in)
5.125
Bearing Brand
REX ROLLER BEARING
Bolt Hole Spacing [Width] (in)
2
Bolt Size (in)
3/4
Bore size (in)
3 in
Bore Size (in)
3 in
Cage Material
Engineered Polymer
Channel Width (in)
4
Clearance
C3 STANDARD
Distance between bolt holes (in)
30.5
Distance from Bearing Centerline to Housing Face (in)
1.56
Distance from frame bolt hole center to bearing centerline (in)
9.25
Fixed vs. Expansion
Fixed
Foot Height (in)
2
Frame
ZNT912
Frame height (in)
10.625 in
Frame Height (in)
10.625 in
Frame length (in)
32.5 in
Frame Length (in)
32.5 in
Frame Material
Welded Steel
Frame type
Protected Screw Take-up Assembly
Frame Type
Protected Screw Take-up Assembly
Frame Width (in)
5.0625 in
Grease Fitting Thread Size
1/8 NPT
Housing coating
Powder coated
Housing Coating
POWDER COATED
Housing construction
Solid
Housing Construction
Solid
Housing material
Cast iron
Housing Material
Cast Iron
Housing style
Take-Up Assembly
Housing Style
Take-Up Assembly
Housing type
Take-Up Assembly
Housing Type
Take-Up Assembly
Housing width (in)
5.06
Insert
2300U
Length Through Bore (in)
4
Locking device kit
SC9
Locking Device Kit
SC9
Locking Type
Single Set Collar
Lubrication type
EXXON RONEX MP STD
Lubrication Type
EXXON RONEX MP STD
Maximum Speed (RPM)
2800 rpm
Maximum Temperature (C)
107
Maximum Temperature (F)
225
Microlock kit
ML3
Misalignment Capability
±2.0° Misalignment - Dynamic
Misalignment Type
Dynamic
Net Weight
85.00
Overall rod length (in)
30
Overall width
5.06
Primary seal
Steel clearance seal
Primary Seal
STEEL CLEARANCE SEAL
Radial Dynamic Load Capacity (lb)
57750 lb
Radial Static Load Capacity (lb)
71500 lb
Retainer material
Engineered Polymer
Retainer Material
Engineered Polymer
Rolling element
Spherical Roller
Seal kit
ZS9
Seal type
Clearance Seal
Setscrew torque (in-lbs)
680
Size code
9
Size Code
9
Take-up block
ZN92300
Take-up Block
ZN92300
Take-up frame assembly type
Protected Screw Type
Take-up Frame Assembly Type
Protected Screw Type
Travel length (in)
12 in
Travel Length (in)
12 in
Vibration frequency fundamental train
0.0072 cps
Vibration Frequency Fundamental Train
0.0072 cps
Vibration frequency inner ring defect
0.1701 cps
Vibration Frequency Inner Ring Defect
0.1701 cps
Vibration frequency outer ring defect
0.1299 cps
Vibration Frequency Outer Ring Defect
0.1299 cps
Vibration frequency roller spin
0.0591 cps
Vibration Frequency Roller Spin
0.0591 cps
Weight unit
LB
3" Mounted Spherical Roller Bearing, Top Angle Protected Screw Take-up Assembly, Single Setscrew Locking Collar, Clearance Seal
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | SealMaster |
| Model | 713324 |
| Brand | Coilhose |
| Model | 27FC4-DHS |
| Brand | Alvord-Polk Tool |
| Model | NAS897-A-0.3125-R |
