We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Timken LSM70BXHFATL is a split cylindrical roller bearing housed unit with a 4-bolt flange mount. This heavy-duty assembly features a split housing for simplified installation and maintenance on industrial machinery. The cylindrical roller bearing insert provides high radial load capacity for applications such as gear reducers, industrial fans, and conveyor systems where rigid shaft support is required.
MODEL LSM70BXHFATL
$2,372.78 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
242 mm Dimension V
0.1 in
286 mm Dimension R
9.5 in
3 mm Dynamic load rating
31024 lbf 138000 N Housing:LS4HXTL Max Speed:3310 rpm Note:KPS, RSS, ATL and HTPS seals. . Seal type:Aluminium Triple Labyrinth Series type:Light Series Shaft Size:70 mm Support type:Round Flange
Bearing - Housing - Seal
LSM70BXHATL
Bearing - Housing - Seal UPC
013992041913
Bearing Number
LSM70BX
Bearing Type
Split Cylindrical Expansion Type
Bearing UPC
013992030399
Bolt Size
4 x M12
Cor - Static Load Rating
36194 lbf 161000 N
Cr - Dynamic Load Rating
31024 lbf 138000 N
Dimension H
2.9 in 73 mm
Dimension L
5.1 in 129 mm
Dimension N
7.563 in 192.09 mm
Dimension P
0.6 in 16 mm
Dimension R
9.5 in 242 mm
Dimension T
11.3 in 286 mm
Dimension V
0.1 in 3 mm
Dynamic Load Rating
31024 lbf
Housing
LS4HXTL
Maximum Speed
3310 rpm
Note
Timken offers a wide range of sealing options including: KPS, RSS, ATL and HTPS seals. .
Seal Type
Aluminium Triple Labyrinth
Series Type
Light Series
Shaft Size
70 mm
Static Load Rating
36194 lbf
Support Type
Round Flange
When faced with flat horizontal or vertical faces, flange units offer a simple mounting solution. As with pillow block supports, flange units are produced with spherical location to accommodate standard bearing housings and provide easy initial alignment of shaft and equipment.
To facilitate positive location of the flange to the surface, the rear face is recessed (dimensions N & V). This allows for a spigot (Tolerance f8) to be located into the flange.
Bearing inspection is simply a matter of removing the top half of the flange and housing. Bearing replacement may also be achieved in the same manner if required.
When integrating flange units into new applications, it should be noted that a maximum radial load equivalent to 0.26Cor is permissible. A maximum axial load of 0.25Ca must also be taken into account for applications with thrust loading. Units for vertically oriented shafts may also need special consideration given to sealing arrangements.
As always, Timken will be happy to advise on any application issues.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Allen Bradley |
| Model | 20AD040A0NYNANC0 |
| Brand | MagPowr |
| Model | LTS75PWEC12MS1 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-830056 |
| Brand | Allen Bradley |
| Model | MPM-B1653E-MJ72AA |
| Brand | E-T-A |
| Model | 4230-T130-K0BU-50A |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more