We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Timken MSE415BRHFATL is a split cylindrical roller bearing (CRB) housed unit with a 4-bolt flange mount. This heavy-duty assembly features a split housing design for simplified installation and maintenance on industrial shafts. The cylindrical roller bearing insert provides high radial load capacity for applications like gear reducers, industrial fans, and conveyor pulleys where rigid shaft support is required.
MODEL MSE415BRHFATL
$8,189.89 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
412 mm Dimension V
0.1 in
470 mm Dimension R
16.2 in
Axial Load Rating
8588 lbf
Bearing - Housing - Seal
MSE415BRHATL
Bearing - Housing - Seal UPC
013992039927
Bearing Number
MSE415BR
Bearing Type
Split Cylindrical Retained Type
Bearing UPC
013992032690
Bolt Size
4 x M24
Ca - Axial Load Rating
8588 lbf 38200 N
Cor - Static Load Rating
157366 lbf 700000 N
Cr - Dynamic Load Rating
118025 lbf 525000 N
Dimension H
4.5 in 114 mm
Dimension L
8.1 in 205 mm
Dimension N
13.625 in 346.07 mm
Dimension P
1 in 25 mm
Dimension R
16.2 in 412 mm
Dimension T
18.5000 in 470 mm
Dimension V
0.1 in 3 mm
Dynamic Load Rating
118025 lbf
Housing
MS10HRTL
Maximum Speed
1600 rpm
Note
Timken offers a wide range of sealing options including: KPS, RSS, ATL and HTPS seals. .
Seal Type
Aluminium Triple Labyrinth
Series Type
Medium Series
Shaft Size
4 15/16 in
Static Load Rating
157366 lbf
Support Type
Round Flange
When faced with flat horizontal or vertical faces, flange units offer a simple mounting solution. As with pillow block supports, flange units are produced with spherical location to accommodate standard bearing housings and provide easy initial alignment of shaft and equipment.
To facilitate positive location of the flange to the surface, the rear face is recessed (dimensions N & V). This allows for a spigot (Tolerance f8) to be located into the flange.
Bearing inspection is simply a matter of removing the top half of the flange and housing. Bearing replacement may also be achieved in the same manner if required.
When integrating flange units into new applications, it should be noted that a maximum radial load equivalent to 0.26Cor is permissible. A maximum axial load of 0.25Ca must also be taken into account for applications with thrust loading. Units for vertically oriented shafts may also need special consideration given to sealing arrangements.
As always, Timken will be happy to advise on any application issues.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Reiff & Nestor |
| Model | 39232 |
| Brand | Linn Gear |
| Model | 120-3B22 |
| Brand | Rollway |
| Model | 23136 CA W33 |
| Brand | Linn Gear |
| Model | 40-3B54 |
| Brand | Reiff & Nestor |
| Model | 60452 |
| Brand | Linn Gear |
| Model | 140-3B11 |
| Brand | Reiff & Nestor |
| Model | 60443 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more