We never sell your data to third parties
Timken LSM50BRHFHTPS is a split cylindrical roller bearing housed unit with a 4-bolt flange mount. This assembly features a split housing design for simplified installation and maintenance on industrial shafts. The cylindrical roller bearing insert provides high radial load capacity for applications like gear reducers, industrial fans, and conveyor systems. The unit is designed for general industrial duty in environments requiring reliable shaft support.
MODEL LSM50BRHFHTPS
$1,572.22 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
180 mm Dimension V
0.1 in
216 mm Dimension R
7.1 in
3 mm Dynamic load rating
18659 lbf 83000 N Housing:LSM50HR Max Speed:4630 rpm Note:KPS, RSS, ATL and HTPS seals. . Seal type:High Temperature Packing Series type:Light Series Shaft Size:50 mm Support type:Round Flange
Axial Load Rating
809.30 lbf
Bearing - Housing - Seal
LSM50BRHHTPS
Bearing - Housing - Seal UPC
013992094643
Bearing Number
LSM50BR
Bearing Type
Split Cylindrical Retained Type
Bearing UPC
013992029874
Bolt Size
4 x M12
Ca - Axial Load Rating
809.30 lbf 3600 N
Cor - Static Load Rating
19558 lbf 87000 N
Cr - Dynamic Load Rating
18659 lbf 83000 N
Dimension H
2.2 in 57 mm
Dimension L
4.1 in 105 mm
Dimension N
5.375 in 136.52 mm
Dimension P
0.5 in 13 mm
Dimension R
7.1 in 180 mm
Dimension T
8.5000 in 216 mm
Dimension V
0.1 in 3 mm
Dynamic Load Rating
18659 lbf
Housing
LSM50HR
Maximum Speed
4630 rpm
Note
Timken offers a wide range of sealing options including: KPS, RSS, ATL and HTPS seals. .
Seal Type
High Temperature Packing
Series Type
Light Series
Shaft Size
50 mm
Static Load Rating
19558 lbf
Support Type
Round Flange
When faced with flat horizontal or vertical faces, flange units offer a simple mounting solution. As with pillow block supports, flange units are produced with spherical location to accommodate standard bearing housings and provide easy initial alignment of shaft and equipment.
To facilitate positive location of the flange to the surface, the rear face is recessed (dimensions N & V). This allows for a spigot (Tolerance f8) to be located into the flange.
Bearing inspection is simply a matter of removing the top half of the flange and housing. Bearing replacement may also be achieved in the same manner if required.
When integrating flange units into new applications, it should be noted that a maximum radial load equivalent to 0.26Cor is permissible. A maximum axial load of 0.25Ca must also be taken into account for applications with thrust loading. Units for vertically oriented shafts may also need special consideration given to sealing arrangements.
As always, Timken will be happy to advise on any application issues.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Precision Twist Drill |
| Model | 5997966 |
| Brand | NK North America Inc. |
| Model | K0384.21216 |
| Brand | Cooper Wiring |
| Model | AHMC360XC1100 |
| Brand | Thomson Linear |
| Model | HD24B045-0500LLX1EMS |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more