We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Timken MSE415BXHFHTPS is a split cylindrical roller bearing housed unit with a 4-bolt flange mount. This assembly features a split housing design for simplified installation and maintenance on industrial shafts. The cylindrical roller bearing insert provides high radial load capacity and is suitable for moderate-speed applications in gearboxes, conveyors, and industrial machinery where precise shaft alignment is required.
MODEL MSE415BXHFHTPS
$7,791.66 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
412 mm Dimension V
0.1 in
470 mm Dimension R
16.2 in
Bearing - Housing - Seal
MSE415BXHHTPS
Bearing - Housing - Seal UPC
013992098856
Bearing Number
MSE415BX
Bearing Type
Split Cylindrical Expansion Type
Bearing UPC
013992032713
Bolt Size
4 x M24
Cor - Static Load Rating
157366 lbf 700000 N
Cr - Dynamic Load Rating
118025 lbf 525000 N
Dimension H
4.5 in 114 mm
Dimension L
8.1 in 205 mm
Dimension N
13.625 in 346.07 mm
Dimension P
1 in 25 mm
Dimension R
16.2 in 412 mm
Dimension T
18.5000 in 470 mm
Dimension V
0.1 in 3 mm
Dynamic Load Rating
118025 lbf
Housing
MSE415HX
Maximum Speed
1600 rpm
Note
Timken offers a wide range of sealing options including: KPS, RSS, ATL and HTPS seals. .
Seal Type
High Temperature Packing
Series Type
Medium Series
Shaft Size
4 15/16 in
Static Load Rating
157366 lbf
Support Type
Round Flange
When faced with flat horizontal or vertical faces, flange units offer a simple mounting solution. As with pillow block supports, flange units are produced with spherical location to accommodate standard bearing housings and provide easy initial alignment of shaft and equipment.
To facilitate positive location of the flange to the surface, the rear face is recessed (dimensions N & V). This allows for a spigot (Tolerance f8) to be located into the flange.
Bearing inspection is simply a matter of removing the top half of the flange and housing. Bearing replacement may also be achieved in the same manner if required.
When integrating flange units into new applications, it should be noted that a maximum radial load equivalent to 0.26Cor is permissible. A maximum axial load of 0.25Ca must also be taken into account for applications with thrust loading. Units for vertically oriented shafts may also need special consideration given to sealing arrangements.
As always, Timken will be happy to advise on any application issues.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Timken Belts |
| Model | R5V2000-6 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-457598 |
| Brand | MCR Safety |
| Model | 9677L |
| Brand | Gates Rubber |
| Model | P60-20M-290 |
| Brand | E-Z Lok |
| Model | SK20015 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-539241 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-592237 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more