We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Timken 2MMVC9107HXVVSULFS637 is a super precision angular contact ball bearing configured as a duplex set with light preload (SUL). This ABEC 7 (P4S) precision class bearing is designed for high-speed machine tool spindles, precision grinders, and jig borers requiring minimal runout and high rigidity. The duplex light preload configuration provides optimal axial stiffness for applications demanding high rotational accuracy and smooth operation.
MODEL 2MMVC9107HXVVSULFS637
$1,328.82 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
0.5512 in C0 - Static Radial Rating (per row)
6920 N
1.600 in Limiting Speed (Grease) (per row)
35760 rpm Limiting speed (oil):71520 rpm O.D. (in):62 mm 2.4409 Outer ring backing diameter:56.6 mm
1560 lbf C1 ISO - Dynamic Radial Rating (per row)
13600 N
2.230 in Precision rating
ISO P4S (ABEC 7/9) Rows per set:Single Seal type:High Speed Total width:14 mm
3070 lbf Cage type
CR - Phenolic Outer Land Riding Cage Contact angle:15 Design units:Metric Inner ring backing diameter:40.6 mm
Ball type
Ceramic Bearing width:14 mm
Ball Type
Ceramic
Bearing Width
14 mm 0.5512 in
Bore
35 mm
C1 ISO - Dynamic Radial Rating (per row)
13600 N 3070 lbf
Cage Type
CPhenolic Outer Land Riding Cage
Contact Angle
15 º
Design Units
Metric
DOuter Ring Backing Diameter
56.6 mm 2.230 in
Dynamic Radial Rating (per row)
15000 N 3380 lbf
I.D.
35 mm
Inner Ring 'To Clear' Radius
1 mm 0.039 in
Inner Ring Backing Diameter
40.6 mm 1.600 in
Limiting Speed (Grease) (per row)
35760 rpm
Limiting Speed (Oil)
71520 rpm
Outer Diameter
62 mm 2.4409 in
Outer Ring 'To Clear' Radius
1 mm 0.039 in
Precision Rating
ISO P4S (ABEC 7/9)
Rows per Set
Single
Seal Type
High Speed
Static Radial Rating (per row)
6920 N 1560 lbf
Total Width
14 mm 0.5512 in
EXTRA-LIGHT ISO 10 SERIES
SUPER PRECISION MMV
Running accuracy and performance meet ABEC 9 (ISO P2) levels.Other features conform to ABEC 7 (ISO P4) requirements.
WN CONSTRUCTION
- Incorporates low shoulder on non-thrust side of both inner and outer rings.
- Balls separated by one-piece cage piloted against a ground thrust shoulder land of the outer ring.
HIGH-SPEED SEAL OPTION
Available with non-contact seals.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Nachi Bearing |
| Model | 6213-2NSENRC3 |
| Brand | Bestorq |
| Model | 2/5VX800 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more