We never sell your data to third parties
Timken 2MMC222WI QUM is a super precision angular contact ball bearing configured as a quadruplex set with medium preload (QUM). This ABEC 7 (P4S) precision bearing is designed for high-rigidity machine tool spindles and other applications requiring extreme rotational accuracy and load capacity.
MODEL 2MMC222WI QUM
Returnable: Yes
1.4961 in C0 - Static Radial Rating (per row)
142000 N
31900 lbf C1 ISO - Dynamic Radial Rating (per row)
177000 N
39800 lbf Cage type
CR - Phenolic Outer Land Riding Cage Contact angle:15 Design units:Metric Inner ring backing diameter:126.4 mm
4.980 in Limiting Speed (Grease) (per row)
8600 rpm Limiting speed (oil):17200 rpm Manufacturing part number:2MMC222WI QUM O.D. (in):200 mm 7.874 Outer ring backing diameter:184.3 mm
5.9844 in World part number
C7222C-T-P4S-QUM
7.260 in Precision rating
ISO P4S (ABEC 7/9) Rows per set:Quadruplex Total width:152 mm
Ball type
Ceramic Bearing width:38 mm
Ball Type
Ceramic
Bearing Width
38 mm 1.4961 in
Bore
110 mm
C0 - Static Radial Rating (per row)
142000 N 31900 lbf
C1 ISO - Dynamic Radial Rating (per row)
177000 N 39800 lbf
Cage Type
CR - Phenolic Outer Land Riding Cage
Ce - Dynamic Radial Rating (per row)
194900 N 43800 lbf
Contact Angle
15 º
d - Bore
110 mm
D - Outer Diameter
200 mm 7.8740 in
da - Inner Ring Backing Diameter
126.4 mm 4.980 in
Da - Outer Ring Backing Diameter
184.3 mm 7.260 in
Design Units
Metric
DOuter Ring Backing Diameter
184.3 mm 7.260 in
Dynamic Radial Rating (per row)
194900 N 43800 lbf
I.D.
110 mm
Inner Ring 'To Clear' Radius
2.1 mm 0.079 in
Inner Ring Backing Diameter
126.4 mm 4.980 in
Limiting Speed (Grease) (per row)
8600 rpm
Limiting Speed (Oil)
17200 rpm
Manufacturing Part Number
2MMC222WI QUM
Outer Diameter
200 mm 7.8740 in
Outer Ring 'To Clear' Radius
2.1 mm 0.079 in
Precision Rating
ISO P4S (ABEC 7/9)
R - Inner Ring "To Clear" Radius
2.1 mm 0.079 in
r - Outer Ring "To Clear" Radius
2.1 mm 0.079 in
Rows per Set
Quadruplex
Static Radial Rating (per row)
142000 N 31900 lbf
Total Width
152.000 mm 5.9844 in
World Part Number
C7222C-T-P4S-QUM
LIGHT ISO 02 SERIES
HIGH PRECISION MV
Running accuracy, performance and dimensional controls conform to ABEC 7 (ISO P4) requirements.
SUPER PRECISION MM
Running accuracy and performance meet ABEC 9 (ISO P2) levels. Other features conform to ABEC 7 (ISO P4) requirements.
WI CONSTRUCTION
- Incorporates low shoulder on non-thrust side of both inner and outer rings.
- Balls separated by one-piece cage piloted against a ground thrust shoulder land of the outer ring.
- Optional one-piece cage piloted on the ball available with MV (P4) product.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more