We never sell your data to third parties
Timken 23024EJW841C3 spherical roller bearing with 120 mm straight bore, 180 mm OD, and 46 mm width. Pressed steel cage (EJ), W841 lubrication, and C3 radial internal clearance. Dynamic load rating 91,700 lbf, static 129,000 lbf. Reference speeds 3,300 rpm oil, 2,700 rpm grease. Supersedes 23024CJW841C3. For industrial gearboxes, paper mills, and mining equipment.
MODEL 23024EJW841C3
Returnable: Yes
1.811 in Lubrication type
Standard Grease O.D. (in):180 mm 7.0866 Outer ring to clear radius:0.080 in Outer ring backing diameter:167 mm
1.811 in Reference thermal speed rating (grease)
2700 RPM Reference thermal speed rating (oil):3300 Static radial rating:408000 N
129000 lbf Geometry factor
0.0735 ISO factor:4.49 Inner ring to clear radius:0.080 in Inner ring backing diameter:134.000 mm
5.3000 in Inner ring width
46 mm
6.600 in Outer ring width
46 mm
91700 lbf Superseded part
23024CJW841C3
Cage material
Steel
Cage type
EJ
Design unit
METRIC
Dynamic radial rating (two-rows)
91700 lbf
Geometry factor
0.0735
I.D.
4.7244 in
Inner ring "to clear" radius
0.080 in
Inner ring backing diameter
5.300 in
Inner ring width
1.811 in
ISO factor
4.49
O.D.
7.0866 in
Outer ring "to clear" radius
0.080 in
Outer ring backing diameter
6.600 in
Outer ring width
1.8110 in
Reference thermal speed rating (grease)
2700
Reference thermal speed rating (oil)
3300
Static radial rating
129000 lbf
Superseded part
23024CJW841C3
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Cutting Tool Technologies |
| Model | RPC1(1.36) TIALN |
| Brand | Linn Gear |
| Model | 60SDS17 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-581886 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more