We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Timken 24130EJW33C4 is a spherical roller bearing with a 150 mm straight bore and C4 radial internal clearance. It features a pressed steel cage (EJ) and a W33 lubrication groove with three holes in the outer ring. This bearing has a dynamic load rating of 264,000 lbf and a static load rating of 378,000 lbf, with reference thermal speeds of 1300 rpm (oil) and 1200 rpm (grease). It is a superseded part for catalog number 24130CJW33C4.
MODEL 24130EJW33C4
$3,749.49 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
264000 lbf Superseded part
24130CJW33C4
3.937 in Lubrication type
Standard Grease O.D. (in):250 mm 9.8425 Outer ring to clear radius:0.080 in Outer ring backing diameter:227.000 mm
3.937 in Reference thermal speed rating (grease)
1200 RPM Reference thermal speed rating (oil):1300 Static radial rating:1180000 N
378000 lbf Geometry factor
0.0869 ISO factor:2.77 Inner ring to clear radius:0.080 in Inner ring backing diameter:169.000 mm
6.7000 in Inner ring width
100 mm
8.9000 in Outer ring width
100 mm
Cage material
Steel
Cage type
EJ
Design unit
METRIC
Dynamic radial rating (two-rows)
264000 lbf
Geometry factor
0.0869
I.D.
5.9055 in
Inner ring "to clear" radius
0.080 in
Inner ring backing diameter
6.700 in
Inner ring width
3.937 in
ISO factor
2.77
O.D.
9.8425 in
Outer ring "to clear" radius
0.080 in
Outer ring backing diameter
8.900 in
Outer ring width
3.9370 in
Reference thermal speed rating (grease)
1200
Reference thermal speed rating (oil)
1300
Static radial rating
378000 lbf
Superseded part
24130CJW33C4
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Balax |
| Model | 13464-000 |
| Brand | Cutler Hammer |
| Model | E53KAL18A2SA |
| Brand | Gates Rubber |
| Model | QD3/5V8.00 |
| Brand | Thomson Linear |
| Model | 511P35C3G1 |
| Brand | Cutler Hammer |
| Model | 10250TA68 |
| Brand | Balax |
| Model | 11305-00T |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more