We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
TIMKEN SDAF 22320 SRB Pillow Block Assembly
MODEL SDAF 22320
Call for Pricing - 888-671-2883
Typically Ships in: 1 day
Returnable: Yes
10.4000 in Outer ring width
104 mm
330000 lbf Superseded part
23232KYMW33C3
4.0945 in Inner ring To clear radius
0.100 in O.D. (in):290 mm 11.4173 Outer ring backing diameter:264.000 mm
4.0945 in Outer ring To clear radius
0.100 in Reference thermal speed rating (grease):1200 RPM Reference thermal speed rating (oil):1400 Static radial rating:1470000 N
435000 lbf Geometry factor
0.0941 ISO factor:3.06 Inner ring backing diameter:190 mm
7.5000 in Inner ring width
104 mm
A
5.25 in
B
16.5 in
Bearing Number
22320
Bolt Hole Length
1.5 in
Bolt Hole Width
0.875 in
Bore taper
1/12 Bore_Taper:1/12 Cage material:Brass Cage type:EM Design unit:Metric Dynamic radial rating (two-rows):1940000 N
C
6.875 in
C0 - Static Radial Rating
205000 lbf 910000 N
C1(2) - Dynamic Radial Rating (Two-Rows)
181000 lbf 804000 N
Cg - Geometry Factor
0.0746
D
2.25 in
Diameter S-2
4 1/2 in
Diameter S-3
3.8125 in
e - ISO Factor
0.33
E Max.
14.5 in
E Min.
13.25 in
F
4.125 in
Full Timken Part Number
SDAF22320
H
10.5 in
Housing Only
SDAF320
L
7.6250 in
Locknut
AN20
Lockwasher
W20
No. of Base Bolts Required
4
Oil Level K
2.125 in
Reference Thermal Speed Rating (Grease)
2400 rpm
Reference Thermal Speed Rating (Oil)
2800 rpm
Size of Base Bolts Required
7/8
Stabilizing Ring 1 Req'd
SR-24-20
Triple Seal 2 Req’d at S-2
LOR118
Triple Seal 2 Req’d at S-3
LOR106
Y
2.2969 in
Y0 - ISO Factor
2.02
Y1 - ISO Factor
2.06
Y2 - ISO Factor
3.07
- Each assembly includes the housing cap and base, cap bolts, bearing, locknut and washer, stabilizing ring, and triple ring seals.
- To order pillow block housing only, use the numbers listed in the "Housing Only" column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
- Assembly and pillow blocks described on this page constitute fixed units.
- To order float units, specify part number plus suffix "Float" or "FL".
- If one end closed assembly is required, specify “CL” in assembly number when ordering.
- All assemblies shown are furnished in cast iron. If cast steel is desired, add the letter "S" to the alpha prefix (e.g., SDAFS 22220).
Note: Speed ratings are found in dimension tables in the spherical roller bearing section.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more
| Brand | Regal Cutting Tools |
| Model | 091608PS |
| Brand | Wiegmann |
| Model | S22120G |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more