We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
TIMKEN SDAF 22338 SRB Pillow Block Assembly
MODEL SDAF 22338
Call for Pricing - 888-671-2883
Typically Ships in: 1 day
Returnable: Yes
10.4000 in Outer ring width
104 mm
330000 lbf Superseded part
23232KYMW33C3
4.0945 in Inner ring To clear radius
0.100 in O.D. (in):290 mm 11.4173 Outer ring backing diameter:264.000 mm
4.0945 in Outer ring To clear radius
0.100 in Reference thermal speed rating (grease):1200 RPM Reference thermal speed rating (oil):1400 Static radial rating:1470000 N
435000 lbf Geometry factor
0.0941 ISO factor:3.06 Inner ring backing diameter:190 mm
7.5000 in Inner ring width
104 mm
A
9.5 in
A (in)
9.5
Assembly weight
700.000 lb
B
32 in
B (in)
32.00
Bearing number
22338
Bearing Number
22338
Bolt hole length
2.625 in
Bolt Hole Length
2.625 in
Bolt hole width
1.5 in
Bolt Hole Width
1.5 in
Bore taper
1/12 Bore_Taper:1/12 Cage material:Brass Cage type:EM Design unit:Metric Dynamic radial rating (two-rows):1940000 N
C
11.25 in
C (in)
11.2500
C0 - Static Radial Rating
635000 lbf 2830000 N
C1(2) - Dynamic Radial Rating (Two-Rows)
534000 lbf 2380000 N
Cg - Geometry Factor
0.1021
D
3.5 in
D (in)
3.5
Diameter
8 3/8 in
Diameter S-2
8 3/8 in
Diameter S-3
7.2500 in
e - ISO Factor
0.32
E Max.
27.875 in
E Min.
25.625 in
F
7.25 in
F (in)
7.25
Full timken part number
SDAF22338
Full Timken Part Number
SDAF22338
H
19.25 in
H1
19.2500 in
Housing only
SDAF338
Housing Only
SDAF338
L
11.813 in
L2
11.813 in
Locknut
AN38
Lockwasher
W38
Max
27.8750 in
Min
25.6250 in
No of base bolts required
4
No. of Base Bolts Required
4
Oil level
3.6875 in
Oil Level K
3.6875 in
Reference Thermal Speed Rating (Grease)
1100 rpm
Reference Thermal Speed Rating (Oil)
1200 rpm
Size of base bolts required
1.5 in
Size of Base Bolts Required
1 1/2
Stabilizing Ring 1 Req'd
SR-44-38
Stabilizing ring 1 req’d
SR-44-38
Triple seal 2 req’d
LOR240
Triple Seal 2 Req’d at S-2
LOR240
Triple Seal 2 Req’d at S-3
LOR229
Y
3.8906 in
Y0 - ISO Factor
2.07
Y1 - ISO Factor
2.12
Y2 - ISO Factor
3.15
- Each assembly includes the housing cap and base, cap bolts, bearing, locknut and washer, stabilizing ring, and triple ring seals.
- To order pillow block housing only, use the numbers listed in the "Housing Only" column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
- Assembly and pillow blocks described on this page constitute fixed units.
- To order float units, specify part number plus suffix "Float" or "FL".
- If one end closed assembly is required, specify “CL” in assembly number when ordering.
- All assemblies shown are furnished in cast iron. If cast steel is desired, add the letter "S" to the alpha prefix (e.g., SDAFS 22220).
Note: Speed ratings are found in dimension tables in the spherical roller bearing section.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more
| Brand | Timken |
| Model | 24802-2108 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more