Image for Illustration purposes only. Actual product may vary

TIMKEN SDAF 23196K X 18 SRB Pillow Block Assembly

Name: TIMKEN SDAF 23196K X 18 SRB Pillow Block Assembly
Brand: Timken
Availability: OutOfStock
Rating: 5.0 (1 reviews)

MODEL SDAF 23196K X 18

BRAND

Timken

SKU

5117982

WEIGHT

5200.000 lb

UOM

each

Call for Pricing - 888-671-2883

Typically Ships in: 1 day

Returnable: Yes

10.4000 in Outer ring width

104 mm

330000 lbf Superseded part

23232KYMW33C3

4.0945 in Inner ring To clear radius

0.100 in O.D. (in):290 mm 11.4173 Outer ring backing diameter:264.000 mm

4.0945 in Outer ring To clear radius

0.100 in Reference thermal speed rating (grease):1200 RPM Reference thermal speed rating (oil):1400 Static radial rating:1470000 N

435000 lbf Geometry factor

0.0941 ISO factor:3.06 Inner ring backing diameter:190 mm

7.5000 in Inner ring width

104 mm

18 in

Adapter Assembly Number

SNP-3196 x 18

54.25 in

Bearing Number

23196K

Bolt Hole Length

3.375 in

Bolt Hole Width

2.5 in

Bore taper

1/12 Bore_Taper:1/12 Cage material:Brass Cage type:EM Design unit:Metric Dynamic radial rating (two-rows):1940000 N

21.625 in

C0 - Static Radial Rating

2790000 lbf 12400000 N

C1(2) - Dynamic Radial Rating (Two-Rows)

1600000 lbf 7110000 N

Cg - Geometry Factor

0.1042

5.75 in

Diameter S-1

18 in

e - ISO Factor

0.30

E Max.

48.875 in

E Min.

47.125 in

15 in

Full Timken Part Number

SDAF23196K18

35.75 in

Housing Only

SDAF3196K x 18

22.25 in

Reference Thermal Speed Rating (Grease)

360 rpm

Reference Thermal Speed Rating (Oil)

390 rpm

Stabilizing Ring 1 Req'd

A8998

Triple Seal Req'd

ER 888-1

Y0 - ISO Factor

2.21

Y1 - ISO Factor

2.26

Y2 - ISO Factor

3.36

Each assembly includes the housing cap and base, cap bolts, bearing, bearing adapter, locknut and lockwasher, stabilizing ring and triple ring seals.
To order pillow block housing only, use the numbers listed in the "Housing Only" column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
Assembly and pillow blocks described on this page constitute fixed units.
To order float units, specify part number plus suffix "Float" or "FL".
If one end closed assembly is required, specify “CL” in assembly number when ordering.
All assemblies shown are furnished in cast iron. If cast steel is desired, add the letter “S” to the alpha prefix (e.g., SDAFS 23152K).

When ordering non-standard pillow block assemblies specify the shaft size.