We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Timken 23080EMBW509C08C3 is a spherical roller bearing with a 400 mm bore and a brass cage (EMB) for shock and high-temperature applications. It features C3 radial internal clearance, a W509 lubrication groove, and a C08 internal design. This bearing is rated for 400-600 mm OD applications, with a dynamic load capacity of 815,000 lbf and a static load capacity of 1,340,000 lbf. It supersedes part number 23080YMBW509C08C3.
MODEL 23080EMBW509C08C3
$24,381.60 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
1340000 lbf Geometry factor
0.1473 ISO factor:4.44 Inner ring to clear radius:0.160 in Inner ring backing diameter:444 mm
17.5000 in Inner ring width
148 mm
21.9000 in Outer ring width
148 mm
5.827 in O.D. (in)
600 mm 23.6220 Outer ring to clear radius:0.160 in Outer ring backing diameter:555.000 mm
5.8270 in Reference thermal speed rating (grease)
660 RPM Reference thermal speed rating (oil):760 Static radial rating:3630000 N
815000 lbf Superseded part
23080YMBW509C08C3
Cage material
BRASS
Cage type
EMB
Design unit
METRIC
Dynamic radial rating (two-rows)
815000 lbf
Geometry factor
0.1473
I.D.
15.7480 in
Inner ring "to clear" radius
0.160 in
Inner ring backing diameter
17.500 in
Inner ring width
5.827 in
ISO factor
4.44
O.D.
23.6220 in
Outer ring "to clear" radius
0.160 in
Outer ring backing diameter
21.900 in
Outer ring width
5.8270 in
Reference thermal speed rating (grease)
660
Reference thermal speed rating (oil)
760
Static radial rating
1340000 lbf
Superseded part
23080YMBW509C08C3
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Cutler Hammer |
| Model | E57P-12SNN2-Q |
| Brand | Hubbell Wiring |
| Model | 2182GYLTRA |
| Brand | Dixon |
| Model | 2880409C |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more