We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Timken 22324EJW33C4 is a spherical roller bearing with a 120 mm straight bore and C4 radial internal clearance. It features a pressed steel cage (EJ) and a W33 lubrication groove with three holes in the outer ring. This bearing has a dynamic load rating of 244,000 lbf and a static load rating of 272,000 lbf, with reference thermal speeds of 2,200 rpm (oil) and 1,900 rpm (grease). It supersedes part number 22324CJW33C4.
MODEL 22324EJW33C4
Returnable: Yes
244000 lbf Superseded part
22324CJW33
272000 lbf Geometry factor
0.0834 ISO factor:3.15 Inner ring to clear radius:0.100 in Inner ring backing diameter:157.000 mm
3.3858 in Lubrication type
Standard Grease O.D. (in):260 mm 10.2362 Outer ring to clear radius:0.100 in Outer ring backing diameter:234.000 mm
3.3858 in Reference thermal speed rating (grease)
1900 rpm Reference thermal speed rating (oil):2200 Static radial rating:1080000 N
6.2000 in Inner ring width
86 mm
9.200 in Outer ring width
86 mm
Cage material
Steel
Cage type
EJ
Design unit
METRIC
Dynamic radial rating (two-rows)
244000 lbf
Geometry factor
0.0834
I.D.
4.7244 in
Inner ring "to clear" radius
0.100 in
Inner ring backing diameter
6.200 in
Inner ring width
3.3858 in
ISO factor
3.15
O.D.
10.2362 in
Outer ring "to clear" radius
0.100 in
Outer ring backing diameter
9.200 in
Outer ring width
3.3858 in
Reference thermal speed rating (grease)
1900
Reference thermal speed rating (oil)
2200
Static radial rating
272000 lbf
Superseded part
22324CJW33C4
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Gates Rubber |
| Model | 2BK30 1.1/8 |
| Brand | Telemecanique |
| Model | XS1M18NA370TF |
| Brand | Cutler Hammer |
| Model | SHB0N4X |
| Brand | E-Z Lok |
| Model | 30670 |
| Brand | Siemens Controls |
| Model | 6ES7151-7FA21-0AB0 |
| Brand | System Plast |
| Model | 882-11R1-DMS-SS |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more