We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Koyo WJ-101410 is a needle roller and cage assembly with a 22.225 mm bore and a 15.875 mm outside diameter. The cage is heat-treated for durability. This assembly is used in applications requiring a compact, high-capacity needle roller complement without an inner ring.
MODEL WJ-101410
Returnable: See conditions
Bore
15.88
I.D.
22.225 mm
O.D.
15.875 mm
| Bearing No. | WJ-101410 | |
| Boundary dimensions(mm) | Fw | 15.875 |
| Ew | 22.225 | |
| Bc | 15.88 | |
| Basic load ratings(kN) | Cr | 15.6 |
| C0r | 17.8 | |
| Fatigue load limit(kN) | Cu | 2.80 |
| Limiting speeds(min-1) | Grease lub. | 19000 |
| Oil lub. | 29000 | |
| Mounting dimensions(mm) | Shaft dia.(h5)(max.) | 15.875 |
| Shaft dia.(h5)(min.) | 15.867 | |
| Housing bore dia(G6)(max.) | 22.245 | |
| Housing bore dia(G6)(min.) | 22.233 | |
| (Refer.)Mass(kg) | 0.012 |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | MROSupply Fasteners |
| Model | FSTPCK-701032 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-211163 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-455011 |
| Brand | Morse |
| Model | MM1074 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-458374 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-830337 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-455468 |