We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Nachi Bearing NU324MC3 120mm Inner Diameter x 260mm Outer Diameter x 55mm Width Cylindrical Roller Bearing - Single Row with Brass Cage
MODEL NU324MC3
Contact supplier for technical support on: 800-829-5787
$700.36 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Material
Steel
Bore Type
Cylindrical
Cage Material
Machined High Strength Brass Cage
Contact Angle (Deg)
N/A
Dynamic Load Capacity (N)
450000
Grease Fill
N/A
Inner Diameter (mm)
120
Inner Ring Material
JIS SUJ2 Steel
Internal Clearance
C3
ISO Precision Class
P0
Limiting Speed - Grease (RPM)
2200
Limiting Speed - Oil (RPM)
2800
Max Operating Temp.
120°C (248°F)
Number of Rows
1
Outer Diameter (mm)
260
Outer Ring Material
JIS SUJ2 Steel
Preload
N/A
Rolling Element Material
JIS SUJ2 Steel
Seals or Shields
No
Series
NU300
Snap Ring
No
Static Load Capacity (N)
510000
Universally (Flush) Ground
N/A
Width (mm)
2800
Cylindrical Roller Bearing NU CONFIGURATION Cylindrical Roller Bearings utilize a modified cylindrical roller that provides line contact with the inner and outer ring raceways. They are suitable for high speeds and have a high radial load capacity. The rollers are guided by ribs on either the inner or outer rings. Depending upon the configuration, the bearings may or may not be able to accept any axial loading. The inner and outer rings are separable which may aid in assembly/disassembly of components. The NU Type bearings has shoulders on both sides of the outer ring and none on the inner ring. This allows the bearing to move axially on the inner ring. Some sizes may be available in a high capacity design (EG) that has larger diameter rollers and a polyamine cage. Stamped steel or machined brass (MY) cages are generally used. These bearings are most commonly used in gearboxes, rolling mills, crushers and pulverizers. Large radial load capacity. Suitable for high speed applications. Low friction between rollers and flanges.
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | PEER Bearing |
| Model | 6006-RLD |
| Brand | Hubbell Wiring |
| Model | SFLCSBKW |
| Brand | Bestorq |
| Model | 4/5V900 |
| Brand | Hubbell Wiring |
| Model | HBL26CM10 |
| Brand | Allen Bradley |
| Model | 100-C43A00 |
